Nsɛntitiriw 1. Synchronous belt no mu paapae ntɛm .
1. Wɔnsusuw tumi a ɛwɔ kar a wɔde tu kwan no mu ne adesoa a wɔde tu no ho.
2、 Adesoa no sõ dodo anaasɛ passive wheel no gyae esiane akwanhyia bi nti, na ɛnam so ma adesoa no tumi yɛ kɛse.
3、Pulley no sua dodo na abɔso no yɛ forcibly bent over.
Anoyie:
1、Momfa nhyehyɛe no nyɛ yiye.
2. Hwɛ sɛnea wɔayɛ no na fa biako a ɛwɔ sẽ pii sen nea edi kan no si pulley no ananmu.
3, ɛsɛ sɛ wɔde di dwuma, wɔkora so, wɔde si hɔ na wɔde di dwuma no yɛ nea ɛfata koraa na wɔhwɛ yiye.
Point 2. Synchronous belt belt no ano a ɛyɛ adwuma .
1、Wɔmma kwan mma ntwahonan no nsɛ.
2、a ɛnyɛ nea ɛfata bearing rigidity.
3、bending a ɛwɔ retaining edge a ɛwɔ belt wheel no mu.
4、Pleley no ntwemu yɛ ketewa sen abɔso no tɛtrɛtɛ.
Anoyie:
1、calibrate gyinabea a ɛwɔ pulley no mu.
2、ma bearing no mu den no yɛ kɛse na siesie no denneennen.
3、tene retaining edge no so anaa fa si ananmu.
4. Hwɛ sɛnea wɔayɛ no.
Point 3.Synchronous belt sẽ a ɛwɔ soro no hyɛ .
1、adesoa no sõ dodo.
2、belt tensioning force no sõ dodo.
3、Abrasive powder layer a wɔaka abom.
4、rough wheel teeth.
Anoyie:
1、Momfa nhyehyɛe no nyɛ yiye.
2、Adjust belt tensioning force no.
3、ma nneɛma a atwa yɛn ho ahyia no nyɛ yiye na ma ahobammɔ a ɛkata so no nkɔ soro.
4、Fa ntwahonan a ɛyɛ hare no to hɔ anaa sesa pulley no.
Point 4. Synchronous belt sẽ no bubu .
1、Skipped sẽ.
2. Passive mfiri akwanhyia adesoa kɔ soro.
Anoyie:
1. Hwɛ sɛnea wɔayɛ no.
2、akwan a ɛfata a wɔfa so yɛ nhyɛso no so.
3、ma pulley no ntwemu yɛ kɛse na ɛma sẽ dodow kɔ soro.
4、Eyi mfiri a ɛnyɛ adwuma yiye no mu .
Point 5. synchronous belt a ɛwɔ rɔba akyi a ɛyɛ fɛ ne nea ɛpaapae .
1、Abɔnten so nhyɛsoɔ ntwahonan no a ɛkyinkyini no yɛ nea wɔasiw ano.
2、Outer Tensioning Wheel Misalignment.
3. hyia mfiri no frame.
4、bere tenten a ɛba fam tebea.
Anoyie:
1、siesie anaa sesa tension wheel bearings no.
2、tene tenten wheel gyinabea.
3、hwɛ na siesie mfiri no afã horow no.
4、Ɛma ɔhyew a ɛwɔ baabi a ɛwɔ no yɛ kɛse.
Point 6. Softening ne akyi.
1、a ɛyɛ hyew kɛse .
2、tensioning ntwahonan gyinabea.
3、aduru a ɛyɛ STICKY.
Anoyie:
1、Momfa ɔhyew a ɛwɔ baabiara no nyɛ adwuma yiye.
2、Hwɛ na siesie tensioning wheel no.
3、Ntim ngo anaa nsakra petrol a ɛne no di nsɛ a ɛne ne ho di nsɛ no.
Nsɛntitiriw 7. Belt tenten mu mpaapaemu .
1、Timing belt no tu mmirika kɔ akyiri sen pulley no ano.
2、Synchronous abɔso no hwirew pulley no ano a ɛgyina hɔ no.
Anoyie:
1、Adjust the position a ɛwɔ belt pulley no so.
2、Hance bearing rigidity no na siesie no denneennen.
Point 8. Tensile nipadua no fã a ɛpaapae .
1、a ɛnyɛ pɛpɛɛpɛ a wɔde gu mu na woyi bere a wɔde bɔ abɔso no fi mu.
2, a wɔde nneɛma a asɛe anaasɛ nkae a ɛyɛ nnam na ɛyɛ nnam afra mu.
Anoyie:
1、Ɔkwan a ɛfata a wɔfa so de synchronous belt gu mu na woyi fi mu.
2、Mfaso a ɛwɔ nneɛma a atwa yɛn ho ahyia mu no yɛ yiye. Fa cover a ɛbɔ ho ban ka ho.
Point 9. Dede pii bere a woretu mmirika .
1、tensioning tumi a synchronous belt no yɛ kɛse dodo.
2. Parallel misalignment a ɛwɔ agyan abien no mu.
3、Bere no tɛtrɛtɛ yɛ kɛse sen pulley no ntwemu.
4、adesoa no sõ dodo.
5、Timing belt ne pulley sẽ no ntumi nyɛ adwuma yiye.
Anoyie:
1、rbrɛ tensioning wheel no ase (nsensan a ɛrehuruw biara nni hɔ).
2、Adjust the positioning a ɛwɔ belt pulley no mu.
3、Momfa nhyehyɛe no nyɛ yiye.
4、Mfaso no nyɛ nea ɛfata.
5、Hwɛ timing belt ne pulley no mu.
Point 10.Belt pulley sẽ a ɛyɛ fɛ .
1、adesoa no sõ dodo.
2、Synchronous belt no mu nhyɛso no sõ dodo.
3、Nneɛma a ɛwɔ pulley no mu no nyɛ papa.
4、Abufuw a ɛyɛ abrasive a wɔaka abom.
Anoyie:
1、Momfa nhyehyɛe no nyɛ yiye.
2、rbrɛ tumi a ɛwɔ nhyɛso mu no ase.
3、Fa nneɛma a ɛyɛ den a ɛwɔ aduru a ɛyɛ den di dwuma wɔ soro.
4、ma nneɛma a atwa yɛn ho ahyia no nyɛ yiye na ɛma ahobammɔ a wɔde kata so no yɛ kɛse.
