Tɛlɛfon: +86 15221953351 E-mail: info@herchyrubber.com
Please Choose Your Language
NNƐM A WƆYƐ
Wowɔ ha: Fie » Nneɛma a wɔyɛ » Synthesis Rubber

Rɔba a Wɔayɛ: Nneɛma a Ɛkɔ Akyiri, Mfaso, ne Nea Wɔde Di Dwuma

1. Fluororubber (FKM) a wɔde yɛ nneɛma.

  • Agyapadeɛ:

    • Ɔhyew a ɛtra so a ɛko tia (-20°C kosi +250°C).

    • Nneɛma soronko a ɛko tia ngo, pɛtro, nnuru a wɔde siw ano, acid, ne bases.

    • Ahoɔden a ɛkorɔn a ɛtwetwe, compression set a ɛba fam, ne nnuru a ɛgyina pintinn a ɛkyɛn so.

    • Ogya ntumi nhyew na ozone ntumi nkɔ mu.

  • Mfaso a ɛwɔ so:

    • Egyina nnuru a ano yɛ den ne nneɛma a atwa yɛn ho ahyia a nhyɛso kɛse ano.

    • Nkwa nna tenten wɔ ahunmu ne kar mu dwumadie mu.

  • Nnwuma a Wɔde Di Dwuma:

    • Wimhyɛn mu pɛtro nhyehyɛe no nsɔano, O-ring, ne gasket.

    • Kar transmission seals, engine hose, ne turbocharger afã horow.

    • Nnuru a wɔde yɛ nneɛma a wɔde yɛ nneɛma a wɔde hyɛ mu ne gaskets.

2. Chloroprene Rɔba (CR) a wɔde yɛ nneɛma .

  • Agyapadeɛ:

    • Ngo a ɛko tia a ɛkɔ fam (eye sen abɔde mu rɔba nanso ennu FKM).

    • Ogya a ɛmma ogya ntumi nkɔ mu a ɛwɔ nneɛma a ɛdum ne ho.

    • Wim tebea a ɛko tia yiye (UV, ozone, ne nsu).

    • Ɛyɛ nea ɛyɛ mmerɛw wɔ ɔhyew a ɛba fam (-40°C kosi +120°C).

  • Mfaso a ɛwɔ so:

    • Ɛka a ɛba fam a ɛnyɛ den sɛ wɔbɛyɛ ho adwuma (extrusion/molding).

    • Mfiri ahoɔden a ɛkorɔn ne abrasion a ɛko tia.

  • Nnwuma a Wɔde Di Dwuma:

    • Ntade a ɛyɛ nsu, nsateaa, ne mfiridwuma mu hose.

    • Nneɛma a wɔde nkata mpaboa ne adansi ho.

    • Cable jackets ne ɔdan atifi nhama.

3. Nitrile rɔba a wɔde nsu afra mu (HNBR) .

  • Agyapadeɛ:

    • Ɔhyew a ɛko tia a ɛkɔ soro (ɛkɔ +150°C) sɛ wɔde toto NBR ho a.

    • Ngo, nsu a wɔde yɛ nsu, ne amine a ɛko tia yiye.

    • Ahoɔden a ɛkorɔn a ɛtwetwe ne ɔbrɛ a ɛko tia.

    • Mframa a ɛmma mframa nkɔ mu a ɛba fam.

  • Mfaso a ɛwɔ so:

    • Ɛkura ahoɔden a ɛyɛ den wɔ nnuru a ano yɛ den a wɔde hyɛ mu bere tenten ase.

    • Nkwa nna tenten sen NBR wɔ tebea horow a emu yɛ den mu.

  • Nnwuma a Wɔde Di Dwuma:

    • Nnwinnade a wɔde tutu ngo ne gas (packers, seals).

    • Kar bere nhyehyɛe, nneɛma a wɔde hyɛ pɛtro mu, ne turbocharger nsɔano.

    • Mfiridwuma mu nsu a wɔde yɛ nsukorade.

4. Silicone Rɔba (VMQ) a wɔde yɛ nneɛma .

  • Agyapadeɛ:

    • Ɔhyew a ɛtrɛw yiye (-60°C kosi +200°C).

    • Elasticity a ɛkorɔn (ɛkɔ 1000% elongation).

    • Electrical insulation a ɛkyɛn so ne ɔhyew a ɛgyina pintinn.

    • Biocompatible na ɛnyɛ adwuma.

  • Mfaso a ɛwɔ so:

    • Kɔ so yɛ nsakrae wɔ mmeae a ɛhɔ yɛ hyew ne nea ɛhɔ yɛ hyew kɛse.

    • Ɛko tia UV, ozone, ne wim tebea.

  • Nnwuma a Wɔde Di Dwuma:

    • Aduruyɛ mfiri (catheters, nneɛma a wɔde hyɛ nipadua mu).

    • Ɛlektrɔnik nneɛma (insulators, keypads).

    • Gasket a ɛyɛ hyew kɛse a wɔde yɛ fononoo ne engine ahorow.

5. Fluorosilicone Rɔba (FVMQ) a wɔde yɛ nneɛma .

  • Agyapadeɛ:

    • Ɛka FKM nnuru a ɛko tia ne VMQ a ɛyɛ mmerɛw bom.

    • Ɔhyew a ɛwɔ hɔ: -50°C kosi +230°C.

    • Ɛko tia pɛtro, srade, ne nsu a wɔde yɛ nsu.

    • Low compression set ne ahoɔden pa.

  • Mfaso a ɛwɔ so:

    • Ɛyɛ adwuma wɔ ɔhyew a ɛkɔ soro ne ɔhyew a ɛba fam a ɛtra so nyinaa mu.

    • Ɛko tia wimhyɛn mu pɛtro a ɛho ahonhon.

  • Nnwuma a Wɔde Di Dwuma:

    • Wimhyɛn mu pɛtro nhyehyɛe no afã horow (valves, seals).

    • Po a emu dɔ mu nsu ase gasket ne nkitahodi ahorow.

    • Kar sensor ahorow ne nhyehyɛe ahorow a wɔde siw mframa bɔne ano.

6. Ethylene Propylene Diene Monomer (EPDM) a wɔde yɛ nneɛma a ɛyɛ nwonwa.

  • Agyapadeɛ:

    • Ozone ne wim tebea a ɛda nsow a ɛko tia.

    • Dielectric ahoɔden a ɛkorɔn ne nsu a ɛko tia.

    • Ɔhyew a ɛwɔ hɔ: -50°C kosi +150°C.

    • Mframa a ɛtumi fa mu a ɛba fam.

  • Mfaso a ɛwɔ so:

    • Nea ɛho ka sua sen biara ma abɔnten so nneɛma.

    • Vibration damping a ɛkyɛn so ne dede a ɛso tew.

  • Nnwuma a Wɔde Di Dwuma:

    • Kar mu wim tebea ho nhama, radiator hose, ne mframa ahwehwɛ nsɔano.

    • Nhama a wɔde yɛ ɔdan atifi ne atare a wɔde kata so.

    • Electrical cable insulation ne tumi a wɔde fa kwan so abɔso.


  • HNBR Rubber a Ɛyɛ Ahoɔden a Ɛko Tia Ngo a Ɛyɛ Medium-Saturation
    HNBR Rubber a Ɛyɛ Ahoɔden a Ɛko Tia Ngo a Ɛyɛ Medium-Saturation
    Product Overview: High-Strength Oil-Resistant Medium-Saturation HNBR Synthetic Rubber

    Wɔayɛ yɛn Medium-Saturation HNBR Synthetic Rubber no sɛnea ɛbɛyɛ a ɛde adwumayɛ soronko bɛma wɔ mfiridwuma mu mmeae a ngo a ɛda adi ne adwennwen kɛse wom. Esiane sɛ acrylonitrile 34% na ɛwɔ mu nti, saa hydrogenated nitrile rubber (HNBR) yi ma ngo a ɛko tia yiye bere a ɛma ɛyɛ mmerɛw na ɛtra hɔ kyɛ, na ɛma ɛyɛ nea eye ma nsɔano, gasket, ne nneɛma a ɛwom wɔ adwumayɛ tebea a emu yɛ den mu.

    Mfiridwuma ho nsɛm titiriw:
    - Acrylonitrile Nneɛma a ɛwɔ mu: 34% – Wɔayɛ no yiye ama ngo a ɛkari pɛ a ɛko tia ne ɔhyew a ɛba fam a ɛyɛ mmerɛw.
    - Mooney Viscosity (ML 1+4 @125°C): 70-90 – Ɛhwɛ hu sɛ ɛyɛ adwuma yiye ma nkuku ne extrusion.
    - Iodine Absorption Value: 11-22 – Ɛda controlled medium saturation adi ma nnuru a ɛyɛ den ne onyin a ɛko tia.
    - Hardness: Adjustable range (sɛ nhwɛsoɔ, 60-90 Shore A) de di dwumadie ahodoɔ ahwehwɛdeɛ ho dwuma.
     
  • GA-9440 Silicone Rɔba a wɔde yɛ nhama (platinum) (HCR) .
    GA-9440 Silicone Rɔba a wɔde yɛ nhama (platinum) (HCR) .
    Aguade ho nkyerɛkyerɛmu: platinum ayaresa a ɛkorɔn voltageresistant silicone rɔba.  
    Key application: awɔw shrinkable nhama nsa, 4Gcommunication.  
    Nneɛma atitiriw: extrusion molding, tensile a ɛkorɔn, highelongation, tii a ɛkorɔn「ahoɔden,deformation nketewa, passthe authentication of RoHS ne REACH
     
    Yɛyɛ ahotoso manufacturer a ɛkorɔn-adwumayɛ silicone rɔba ma cable accessories. Yɛn GA-9440 Silicone Rubber for Cable Accessories (Platinum) (HCR) yɛ engineered sɛnea ɛbɛyɛ a ɛbɛma ahoɔden a ɛkyɛn so na ayɛ nsakrae ama cable dwumadie ahodoɔ. Yɛyɛ yɛn ho titiriw wɔ silicone rɔba nneɛma a ɛyɛ papa a edi cable adwumayɛkuw no ahwehwɛde ahorow a emu yɛ den ho, a yɛde akɛse ne nea wɔakyerɛkyerɛ mu ahorow ma.
  • GA-88×× Silicone Rɔba a ɛmma ogya ntumi nhyew a ɛyɛ hann (HCR) .
    GA-88×× Silicone Rɔba a ɛmma ogya ntumi nhyew a ɛyɛ hann (HCR) .
    Dwumadi: ɛfata sɛ wɔyɛ nneɛma ahorow nyinaa a ogya ntumi nhyew denam compression molding, extrusion, ne kalenda kwan so.
    Nneɛma atitiriw: halogen-free ogya-retardant,excellent ogya retardancy, wideadaptability of curing nhyehyɛe, twa nokwaredi a RoHS ne REACH.
     
    Shanghai Herchy Rubber Co., Ltd yɛ adwumakuw a edi kan a ɛyɛ silicone rɔba a ɛyɛ adwuma yiye. Yɛyɛ yɛn ho titiriw wɔ ano aduru a ɛkorɔn na ɛyɛ foforo a yɛyɛ ma nnwuma ahorow mu, a yɛde yɛn adwene si adetɔfo biara ahiade soronko a wobedi ho dwuma so. Sɛ́ wo hokafo a wogye wo di no, yɛde GA-88×× Translucent Flame-retardant Silicone Rubber (HCR) ma, a wɔayɛ sɛ ebedu nnwuma gyinapɛn a emu yɛ den so na ama wo nneɛma no adwumayɛ atu mpɔn.
  • GA-91X1 Silicone Rɔba a ɛko tia (Silica a ɛtɔ gu fam) (HCR) .
    GA-91X1 Silicone Rɔba a ɛko tia (Silica a ɛtɔ gu fam) (HCR) .
    Wɔ Shanghai Herchy Rubber Co., Ltd., yɛde premium high-consistency rubber (HCR) nneɛma a ɛyɛ pɛpɛɛpɛ ma nnwuma a ɛhwehwɛ adwumayɛ a ɛkorɔn ne ahotoso ma. Yɛn GA-91X1 ade no ka antistatic ahoɔden a ɛkɔ anim bom, na ɛde ahobammɔ soronko ma wɔ electrostatic discharge ho. Sɛ wɔde silica a ɛtɔ gu fam ka ho a, rɔba no kura mfiridwuma mu su a eye kyɛn so, a ahoɔden a ɛtwetwe ne ahoɔden a ɛkɔ soro ka ho. Sɛ́ ebia wuhia nneɛma a wode bɛyɛ ɛlɛtrɔnik mfiri, nsɔano, anaa nneɛma afoforo a ɛyɛ pɛpɛɛpɛ no, yɛhwɛ hu sɛ ade biara du nnwuma gyinapɛn ahorow ho na wɔayɛ no sɛnea w’ahiade pɔtee te.
  • GA-30×3 Silicone Rɔba (Silica a ɛyɛ wusiw) a ɛwɔ ahoɔden a ɛkorɔn (HCR) .
    GA-30×3 Silicone Rɔba (Silica a ɛyɛ wusiw) a ɛwɔ ahoɔden a ɛkorɔn (HCR) .
    Dwumadi: nsɔano a ɛkorɔn, mats, agumadi cushions ne afoforo a ɛkorɔn resilience nneɛma.
    Nneɛma atitiriw: ahoɔden a ɛkorɔn, processab小ty a eye kyɛn so,twam RoHS,REACH, ne LFGB no nokwaredi.
     
    Shanghai Herchy Rubber Co., Ltd. yɛ wo ahotoso manufacturer ne supplier a ɛkorɔn rɔba compounds, titiriw wɔ GA-30 × 3 Silicone Rubber (fumed Silica) a High Resilience (HCR) yɛ mu. Yɛn adwumakuw no ayɛ krado sɛ yɛde nneɛma soronko a wɔayɛ ama w’ahiade pɔtee ne w’ahwehwɛde ahorow bɛma. Yɛde yɛn hoahoa yɛn ho wɔ yɛn tumi a yɛde ano aduru a wɔahyɛ da ayɛ ama a yɛwɔ ahofama sɛ yɛbɛyɛ nea ɛkorɔn ne adwumayɛ a ɛda nsow. Di yɛn nkitaho nnɛ na fi wo adwuma a edi hɔ no ase na nya yɛn rɔba ano aduru a ɛkorɔn no mu osuahu wɔ bo a ɛyɛ den so.
  • GA-33×1 Silicone Rɔba a Ɛma Nhumu Kɛse (Silica a ɛyɛ wusiw) (HCR) .
    GA-33×1 Silicone Rɔba a Ɛma Nhumu Kɛse (Silica a ɛyɛ wusiw) (HCR) .
    Dwumadi: nipple, sundries a ɛyɛ mmerɛw kɛse ne akwahosan ho nneɛma.
    Nneɛma titiriw: transparence a ɛkorɔn, ahoɔden a ɛkorɔn, processability a ɛkyɛn so,twam nokwaredi a RoHS, REACH, ne LFGB.
     
    Yɛyɛ GA-33 × 1 Highly Transparent Silicone Rubber (fumed Silica) (HCR) yɛfo na yɛde ma. Yɛde ano aduru a wɔayɛ ama nnwuma a ɛhwehwɛ sɛ wɔyɛ silicone rɔba a ɛyɛ mmerɛw na ɛyɛ adwuma yiye ma. Yɛn kuw no betumi ayɛ silicone rɔba a ɛwɔ nsɛm pɔtee a ɛfa ho de adi wo adwuma no ahiade ho dwuma. Yɛnam mfiridwuma a ɛkɔ anim ne mfiridwumayɛfo a wɔn ho akokwaw so hwɛ hu sɛ wɔde nneɛma a ɛkorɔn sen biara na wɔde bɛma ntɛmntɛm.

NKYERƐKYERƐMU A ƐYƐ NTƐM

YƐN NNƐM

NKYERƐKYERƐMU A ƐFA NKYERƐKYERƐMU HO

Fa ka ho: No.33, Ɔkwan 159, Taiye Kwan, Fengxian Mantam, Shanghai
Tɛlɛ / WhatsApp / Skype: +86 15221953351 wobɛtumi akyerɛw wo din
E-mail:  info@herchyrubber.com
Nneɛma a wɔde yɛ adwuma     2023 Shanghai Herchy Rubber Co., Ltd. Sitemap a Wɔde Di Dwuma |   Kokoam Nsɛm Ho Nhyehyɛe | Mmoa a Wɔde Ma Leadong na ɛwɔ hɔ.