GA-97XX
Herchy
Availability: | |
---|---|
Quantity: | |
GA-97XX Oil Resistant Silicone Rubber (HCR)
Application: suitable for the production of oil resistant products.
Key features: high strength, good tolerance with ASTM 1# and IRM903 Oil, pass theauthentication of RoHS and REACH.
Test: 1% of curing agent (50% paste of DBPMH in silicone gum), 175°Cx5min x15MPa.
Product parameters | |||||
Product | GA-9740 | GA-9750 | GA-9760 | GA-9770 | |
Appearance | Gray | ||||
Williamplasticity | 140 | 180 | 200 | 260 | |
Hardness (ShoreA) | 40 | 50 | 60 | 70 | |
Density(g/cm3) | 1.23 | 1.25 | 1.28 | 1.32 | |
Tensile strength (MPa) | 3.5 | 4.5 | 5 | 5.5 | |
Elongation(%) | 700 | 600 | 400 | 250 | |
Tear strength (kN/m) | 15 | 15 | 15 | 15 | |
175"C x22h Compression(%) | 20 | 20 | 20 | 20 | |
Air ageing 225°C x70H | Hardness change | 1 | 2 | 2 | 2 |
Tension strength change rate | -25% | -25% | -25% | -25% | |
Rate of elongation change | -30% | -30% | -30% | -30% | |
IRM903oil 150°C x70H | Hardness change | -18 | -18 | -17 | -16 |
Tension strength change rate | -35% | -35% | -35% | -35% | |
Rate of elongation change | -20% | -20% | -20% | -20% | |
Volume change | 36% | 36% | 35% | 35% |
GA-97XX Oil Resistant Silicone Rubber (HCR)
Application: suitable for the production of oil resistant products.
Key features: high strength, good tolerance with ASTM 1# and IRM903 Oil, pass theauthentication of RoHS and REACH.
Test: 1% of curing agent (50% paste of DBPMH in silicone gum), 175°Cx5min x15MPa.
Product parameters | |||||
Product | GA-9740 | GA-9750 | GA-9760 | GA-9770 | |
Appearance | Gray | ||||
Williamplasticity | 140 | 180 | 200 | 260 | |
Hardness (ShoreA) | 40 | 50 | 60 | 70 | |
Density(g/cm3) | 1.23 | 1.25 | 1.28 | 1.32 | |
Tensile strength (MPa) | 3.5 | 4.5 | 5 | 5.5 | |
Elongation(%) | 700 | 600 | 400 | 250 | |
Tear strength (kN/m) | 15 | 15 | 15 | 15 | |
175"C x22h Compression(%) | 20 | 20 | 20 | 20 | |
Air ageing 225°C x70H | Hardness change | 1 | 2 | 2 | 2 |
Tension strength change rate | -25% | -25% | -25% | -25% | |
Rate of elongation change | -30% | -30% | -30% | -30% | |
IRM903oil 150°C x70H | Hardness change | -18 | -18 | -17 | -16 |
Tension strength change rate | -35% | -35% | -35% | -35% | |
Rate of elongation change | -20% | -20% | -20% | -20% | |
Volume change | 36% | 36% | 35% | 35% |