Category hrang hrang .

GA-97XX oil laka inven theih silicone rubber (HCR)

Share to:

GA-97XX oil laka inven theih silicone rubber (HCR)

A hman dan: Oil resistant product siam chhuahna atan a tha.

Thil pawimawh: chakna sang tak, ASTM 1# leh IRM903 oil hmanga tolerance tha tak, Rohs leh reach-a pass pass.

Entawn tlak:
GA-97xx a ni.
Chhinchhiah:
Herchy a ni a .

A awm theihna:

Zat:



zawhna zawt rawh . Basket ah dah la .

Product sawifiahna .

GA-97XX oil laka inven theih silicone rubber (HCR)

A hman dan: Oil resistant product siam chhuahna atan a tha.
Thil pawimawh: chakna sang tak, ASTM 1# leh IRM903 oil hmanga tolerance tha tak, Rohs leh reach-a pass pass.
Test: Curing agent zinga 1% (silicone gum-a dbpmh paste 50%), 175°CX5min x15mpa.

Product Parameters 1000 a ni.
Thilsiam		GA-9740 a ni.	GA-9750 a ni.	GA-9760 a ni.	GA-9770 a ni.
Landan		Paw
Williamplasticity .		140	180	200	260
Harsatna (Shorea) .		40	50	60	70
Density(G/CM3) a ni.		1.23	1.25	1.28	1.32
Tensile chakna (MPA) .		3.5	4.5	5	5.5
Elongation(%) .		700	600	400	250
Tear chakna (kn/m) .		15	15	15	15
175'C x22h compression(%) a ni.		20	20	20	20
Thli a upa tawh 225°C x70H .	Hardness thlak danglam .	1	2	2	2
	Tension chakna thlak dan tur .	-25% a ni.	-25% a ni.	-25% a ni.	-25% a ni.
	Rate of elongation thlak dan .	-30% a ni.	-30% a ni.	-30% a ni.	-30% a ni.
IRM903oil 150°C x70h a ni.	Hardness thlak danglam .	-18	-18	-17	-16
	Tension chakna thlak dan tur .	-35% a ni.	-35% a ni.	-35% a ni.	-35% a ni.
	Rate of elongation thlak dan .	-20% a ni.	-20% a ni.	-20% a ni.	-20% a ni.
	Volume inthlak danglamna .	36% a ni.	36% a ni.	35% a ni.	35% a ni.