Category hrang hrang .

Share to:

Fluorosilicone rubber FV9400 a ni.

He product hi Fluorosilicone elastomer chu base glue atan homogeneous mixture a ni a, filler leh additive hrang hrang a awm bawk.
Chakna sang tak leh resilience a nei bawk.
Oil resistance tha tak, solvent resistance leh temperature sang leh hniam resistance.

Entawn tlak:
FV9400 a ni.
Chhinchhiah:
Herchy a ni a .

A awm theihna:

A tam ber:



zawhna zawt rawh . Basket ah dah la .

Product sawifiahna .

Thil	Indicator te .
	Grade hrang hrang .	FV9430 a ni.	FV9440 a ni.	FV9450 a ni.	FV9460 a ni.	FV9470 a ni.	FV9480 a ni.
	A lan dan test dan .	Milky white translucent 1000 a ni.			A sen deuh .
A bik takin gravity/ g/cm .³	ASTM D792 a ni a.	1.38	1.41	1.42	1.43	1.45	1.47
Hardness/shorea .	ASTM D2240 a ni.	28	40	48	60	70	80
Tensile chakna/MPa .	ASTM D412 a ni a.	10.2	9.5	9.5	10.2	9.9	8.1
Elongation a awm a, chawlh a pe /% .	ASTM D412 a ni a.	485	494	363	296	241	159
Tear chakna/kn/m .	ASTM D624-B a ni.	18	26	19	22	21	16
Compression set(177°C*22H) a ni.	ASTM D395 a ni a.	9	8	8	7	8	9
Inpawtfan/%	ASTM D1054 a ni a.	41	35	46	40	37	39
*Heat resistance 225°Chai a ni.	Hardness thlak danglam /Khawchhung a .	+2 a ni.	+2 a ni.	+3 a ni.	+2 a ni.	+2 a ni.	+3 a ni.
	Tensile chakna thlak danglam, % .	-18	-17	-21	-25	-20	-19
	Break thlak huna elongation, % .	-19	-16	-18	-21	-16	-15
Fuel C a ni a, C. Volume thlak danglam/% . 23°C/72h a ni.	ASTM D471 a ni a.	+22 a ni.	+19 a ni.	+18 a ni.	+19 a ni.	+19 a ni.	+19 a ni.
Curing dinhmun .	BIS atanga 0.7 parts(2+5), stage pakhat vulcanisation 170°Chai 15min, stage pahnih vulcanisation: 200°C×4h.