Category hrang hrang .

Ethylene Propylene Rubber-EPDM/EPM hmanga siam a ni

Share to:

Ethylene Propylene Rubber-EPDM/EPM hmanga siam a ni

Ethylene propylene rubber hi synthetic rubber a ni a, ethylene leh propylene te chu monomer ber atan hman a ni a, molecular chain chhunga monomer awm dan hrang hrang a zirin binary ethylene propylene rubber(EPM) leh tertiary ethylene propylene rubber(EPDM) te a awm a ni.

A awm theihna:

A zat:



Zawhna zawt rawh Basket ah dah la .

Ethylene Propylene Rubber – EPDM/EPM hmanga siam a ni

EPDM performance thatna ber chu a hnuaia mi ang hi a ni.

(1) High cost performance, raw rubber density 0.86-0.90g/cm3 chauh nei, chu chu raw rubber density nei common rubber rit ber a ni tin, rubber senso tihtlem nan bottle-ah tam tak dah theih a ni bawk.

(2) Tar chakna tha tak, khaw lum laka invenna, ozone laka invenna, ni êng laka invenna, lumna do thei, tui laka invenna, tui vapor do theihna, UV laka invenna, radiation laka invenna leh tar chakna dangte a nei. EPDM hi unsaturated diene rubber dang NR, SBR, BR, NBR, CR, etc. nena hman dun a nih chuan polymer antioxidant emaw anti-aging agent emaw angin a thawk thei a ni.

(3) Chemical laka invenna tha tak, acid, alkali, detergent, ran leh thlai hriak, zu, ketone, etc.; tui laka invenna tha tak, tui lum lutuk, tui vapor do theihna; polar oil laka invenna a ni.

(4) Insulation performance tha tak, volume resistivity 1016Ω-cm, breakdown voltage 30-40MV/m, dielectric constant (1kHz, 20°C) 2.27.

(5) Wide operating temperature range, minimum operating temperature -40-60°C, 130°C hnuai lam rei tak hman theih a ni.

Hirsch Rubber hian EPDM/EPM hi ram 15-ah a thawn chhuak a, chung zingah chuan United States, Russia, Brazil, Argentina, South Korea, Germany, Italy, Spain, Australia, leh India te pawh an tel.

Ethylene Propylene Rubber-EPDM/EPM hmanga siam a ni

Herchy a ni	Mooney Viscosity 1000 a ni.	Mooney Viscosity 1000 a ni.	Mooney Viscosity 1000 a ni.	Ethylene a awm zat .	ENB Thupui	Extend-oil A chhunga awm	Dilna	Nunzia
Pawl	ML(1+4)100°C a ni	ML(1+4)125°C a ni	ML(1+4)150°C a ni	wt% 100% a ni.	wt% 100% a ni.	PHR	Dilna	Nunzia
S501A a ni	44	[30] .		53	4.1		Injection Molding Products ;Highness nei tha tak tak te;	Mooney viscosity hniam tak; Liquidity tha tak a awm a; Temperature hniam tak do theihna;
S505A a ni	45	[29] .		55	9.4		Hardness sang tak nei thil;Tire sidewall;Foamed parts;	Mooney viscosity hniam tak; Liquidity tha tak a awm a; ENB content sang tak a awm a; Curing speed chak tak; Temperature hniam tak do theihna;
S537-3 ah hian a awm		35		57	2.3		Inner tube;Kekawrte;In sakna machinery parts te	Temperature sang tak laka inven theihna;
S537-2 ah hian a awm		40		57	3		Inner tube;In sakna hmanrua chi hrang hrang	Temperature sang tak laka inven theihna;
S512F a ni		63		69	4.5		Hose;Kawngkhar leh kawngkhar sealing strips;Extrusion Product;	Ethylene tamna a awm a; Mechanical property sang tak nei te; Processing property tha tak a ni
S5890F a ni		[87] .	64	68	5.5		Hose;Sealing strip thianghlim tak;Gasket;	Filling sang tak; Processing property tha tak;
S552 a ni		84		58	4.1		Hose;Dense sealing strip;Gasket;Industrial thil siam chhuah;	Processing property tha tak; Temperature resistance hniam; Mechanical property sang
S552-1 ah hian a awm		84		58	5.7		Hose;Dense sealing strip;Industrial thil siam chhuah;	Processing property tha tak; Temperature resistance hniam; Mechanical property sang; Rebound sang
S553 a ni		[98] .	72	62	4.5		Kawngkhar leh kawngkhar sealing strips;Tui tlak lohna;	Mooney viscosity sang; Filling sang; Temperature resistance hniam; Mechanical property sang;
S5206F a ni		[84] .	81	60	8.5		Sponge profile;Foamed parts;	Mooney viscosity sang; ENB content sang; Curing speed chak; Mechanical property sang;
S5527F tih a ni		[109] a ni.	81	60	8.5		Sponge profile;Foamed parts;Rebound sang tak tak siam chhuah;	Filling sang tak; Mooney viscosity sang; ENB content sang; Curing speed sang; Mechanical property sang;
S6090WF a ni		53		70	5.7	50	Hardness hniam thil;Hose;Washing machine kawngkhar seal;Automobile wire harness;High rebound products;Mechanical property sang tak nei	Ethylene tamna; Mooney viscosity sang; Mechanical property sang; Processing property tha tak;
S600WF a ni	61	[41] .		72	4	100	Hardness hniam thil;Bicycle tyre;Automobile wire harness;High rebound products;Mechanical property sang tak nei	Filling sang tak; Mechanical property sang tak; Processing property tha tak;
S7486F tih a ni		92	67	60	9		Sponge profile;Dense sealing strip;A then foam nei;	Ethylene a tlem; ENB a tam; Fast curing speed;
S6075WF a ni		50		60	4.7	75	Hardness hniam thil;Injection Molding Products ;Automobile wire harness;Mechanical property sang tak nei	Ethylene a tlem; Mooney viscosity sang; Processing property tha tak; Temperature resistance hniam;

Herchy a ni	Mooney Viscosity 1000 a ni.	Mooney Viscosity 1000 a ni.	Mooney Viscosity 1000 a ni.	Ethylene a awm zat .	ENB Thupui	Extend-oil A chhunga awm	Dilna	Nunzia
Pawl	ML(1+4)100°C a ni	ML(1+4)125°C a ni	ML(1+4)150°C a ni	wt% 100% a ni.	wt% 100% a ni.	PHR	Dilna	Nunzia
J-2070 a ni		44* a ni.		57.8	1.9		Inner tube;Kekawrte;In sakna machinery parts te	Temperature sang tak laka invenna;Temperature hniam laka invenna;
J-2080 a ni		53		62	2		Inner tube;Kekawrte;In sakna machinery parts te	Temperature sang resistance;Temperature hniam resistance;Mechanical property sang tak nei
3062E ah a awm		41		68.5	3.9	20	Injection Molding Products ;Hose;Kawngkhar leh kawngkhar sealing strips;Extrusion Product;	Ethylene tamna a awm a; Mechanical property sang tak nei te; Processing property tha tak a ni
J-3060P a ni		45		68.5	4		Hose;Kawngkhar leh kawngkhar sealing strips;Extrusion Product;	Ethylene tamna a awm a; Mechanical property sang tak nei te; Processing property tha tak a ni
J-3080 a ni		70		68.5	4		Hose;Kawngkhar leh kawngkhar sealing strips;Extrusion Product;	Ethylene tamna a awm a; Mechanical property sang tak nei te; Processing property tha tak a ni
J-3080P a ni		70		68.5	4		Hose;Kawngkhar leh kawngkhar sealing strips;Extrusion Product;	Ethylene tamna a awm a; Mechanical property sang tak nei te; Processing property tha tak a ni
J-3092E a ni		60		57.2	4.6	20	Hose;Kawngkhar leh kawngkhar sealing strips;Extrusion Product;	Ethylene tamna a awm a; Mechanical property sang tak nei te; Processing property tha tak a ni
4045	45			52	7.7		Hardness sang tak nei thil;Tire sidewall;Foamed parts;	Mooney viscosity hniam tak; Liquidity tha tak a awm a; ENB content sang tak a awm a; Curing speed chak tak; Temperature hniam tak do theihna;
J-4090 ah a awm		65		52.5	7.7		Tyre sidewall;A then foam nei;	ENB content sang tak a awm a; Curing speed chak tak; Temperature hniam tak do theihna;

Herchy a ni	Mooney Viscosity 1000 a ni.	Mooney Viscosity 1000 a ni.	Mooney Viscosity 1000 a ni.	Ethylene a awm zat .	Propylene awm zat	ENB Thupui	Extend-oil A chhunga awm	Dilna	Nunzia
Pawl	ML(1+4)100°C a ni	ML(1+4)125°C a ni	ML(1+4)150°C a ni	wt% 100% a ni.	wt% 100% a ni.	wt% 100% a ni.	PHR	Dilna	Nunzia
CO 033 a ni	30			72	28
CO 034 a ni	44			72	28
CO 038 a ni		60		72	28
CO 043 a ni	33			55	45
CO 054 a ni	44			59	41
CO 058 a ni	80	60		52	48
CO 059 a ni		79		59	41
TER 4033 a ni	30			70	25	5		Hardness sang tak nei thil siam;Injection Molding Products;Automobile rubber seal strip	Mooney viscosity hniam tak; Liquidity tha tak a awm a; Ethylene tamna a awm a; Mechanical property sang tak nei te; Processing property tha tak a ni
TER 4038EP ah a awm		60		68.6	27	4.4		Hose;Kawngkhar leh kawngkhar sealing strips;Extrusion Product;	Ethylene tamna a awm a; Mechanical property sang tak nei te; Processing property tha tak a ni
TER 4039 a ni		77		68.6	27	4.4		Hose;Kawngkhar leh kawngkhar sealing strips;Extrusion Product;	Ethylene tamna a awm a; Mechanical property sang tak nei te; Processing property tha tak a ni
TER 4044 a ni	44			61	35	4		Injection Molding Products ;Highness nei tha tak tak te;	Mooney viscosity hniam tak; Liquidity tha tak a awm a; Mechanical property sang tak nei te; Processing property tha tak a ni
TER 4047 a ni		55		55.5	40	4.5		Brake Hose;Molded products ;Gasket;In sakna hmanrua parts;Inner tube;Kekawrte;	Ethylene a tlem a; Processing property tha tak a ni a; Temperature hniam tak a ni
TER 4049 a ni		76		55.5	40	4.5		Hose;Dense sealing strip;Gasket;Industrial thil siam chhuah;	Ethylene a tlem a; Mechanical property sang tak nei te; Temperature hniam tak a ni
TER 4334 a ni		28		68.3	27	4.7	43	Hardness sang tak tak siam;Injection Molding Products;Automobile rubber seal strip;Industrial thil siam	Mooney viscosity hniam tak; Liquidity tha tak a awm a; Ethylene tamna a awm a; Mechanical property sang tak nei te; Processing property tha tak a ni
TER 4436 a ni		43		66.5	28	5.5	67	Washing machine kawngkhar seal;Industrial products	Processing property tha tak a ni a; Mechanical property sang tak nei te;
TER 4437 a ni		57		63.5	32	4.5	67	Washing machine kawngkhar seal;Industrial products;	Processing property tha tak a ni a; Mechanical property sang tak nei te; Temperature sang tak a do theihna;
TER 4535 a ni		32		64.6	32	3.4	100	Washing machine kawngkhar seal;Molded products ;	ENB awm zat tlem; Temperature sang tak a do theihna;
TER 6148 a ni		65		53	40	7	18	Foamed parts;Sponge profile;Molded thil siam chhuah te ;	Ethylene a tlem a; ENB content sang tak a awm a; Curing speed chak tak; Temperature hniam tak a ni
TER 6235 a ni		33		60.6	32	7.4	30	Inner tube;Kekawrte;Foamed parts;Sponge profile;Molded products	Mooney viscosity hniam tak; Liquidity tha tak a awm a; Ethylene tamna a awm a; Mechanical property sang tak nei te; Processing property tha tak a ni a; ENB content sang tak a awm a; Curing speed chak tak;
TER 6537 a ni		43		60	32	8	100	Foamed parts;Sponge profile;Washing machine kawngkhar seal;Molded products	ENB content sang tak a awm a; Curing speed chak tak;
ter 9046 a ni.	67			60.1	31	8.9		Foamed parts;Sponge profile;Industrial thil siam chhuah te	ENB content sang tak a awm a; Curing speed chak tak;
TER 4548 a ni		47		59.5	36	4.5	10	Inner tube;Kekawrte;Molded products ;Industrial products;Molded products	Mooney viscosity hniam tak; Liquidity tha tak a awm a;
TER 8148 a ni		68		52.5	39	8.5	21	Foamed parts;Sponge profile;Industrial thil siam;Molded thil siam	Ethylene a tlem a; ENB content sang tak a awm a; Curing speed chak tak; Temperature hniam tak a ni
TER 7040 a ni		87		53.5	40	6.5		Hose;Kawngkhar leh kawngkhar sealing strips;Extrusion Product;	Ethylene a tlem a; Filling sang tak a awm a; Mooney viscosity sang tak a nei a; Mechanical property sang tak nei te; Temperature hniam tak a ni
TER 4049 a ni		76		55.5	40	4.5		Hose;Kawngkhar leh kawngkhar sealing strips;Extrusion Product;	Ethylene a tlem a; Temperature hniam tak a ni
TER 5029 a ni		80		69.5	25	5.5		Hose;Kawngkhar leh kawngkhar sealing strips;Extrusion Product;	Filling sang tak a awm a; Ethylene tamna a awm a; Mooney viscosity sang tak a nei a; Mechanical property sang tak a nei