Tel: +86 15221953351 E-mail: info@herchyrubber.com
Please Choose Your Language
THIL THAWN THAWN THAWN THAWN THAWN THAWN THIL THIL THAWN THIN
Hetah hian i awm: In » Thil siam chhuah te » Synthesis Rubber

Synthetic Rubbers: A nihna chipchiar tak, a thatna leh a hman dan

1. Fluororubber (FKM) hmanga siam a ni.

  • Thil neih:

    • A lumna nasa tak (-20°C atanga +250°C thleng) a ni.

    • Oil, fuel, solvent, acid leh base te laka a invenna danglam tak.

    • Tensile strength sang tak, compression set hniam tak, leh chemical stability tha tak a nei bawk.

    • Meialh laka invenna leh ozone laka invenna a ni.

  • A thatna:

    • Chemical nasa tak leh pressure sang tak awmna hmunah a tuar thei.

    • Aerospace leh automotive application-ah service life rei tak a awm.

  • Dilna: 1.1.

    • Vanlawng fuel system seal, O-ring, leh gasket te a awm bawk.

    • Automotive transmission seal, engine hose, leh turbocharger component te a awm bawk.

    • Chemical processing hmanrua lining leh gasket te a awm bawk.

2. Chloroprene rubber (CR) a ni.

  • Thil neih:

    • Oil resistance moderate (natural rubber aiin a tha zawk mahse FKM aiin a tlem zawk).

    • Flame retardant leh mahni inhnukdawk theihna nei.

    • Khaw lum leh khaw vawt laka invenna tha (UV, ozone, leh tuihna).

    • Temperature hniam (-40°C atanga +120°C) ah pawh a inthlak thei.

  • A thatna:

    • Cost-effective leh processing awlsam tak (extrusion/molding) a ni.

    • Mechanical strength sang tak leh abrasion resistance.

  • Dilna: 1.1.

    • Wet suit, kutkawr, leh industrial hose te a awm bawk.

    • Kekawr leh sakna atana hman tur adhesives.

    • ~!phoenix_var149!~

3. Hydrogenated nitrile rubber (HNBR) a ni.

  • Thil neih:

    • NBR nena khaikhin chuan heat resistance (+150°C thleng) a tichak zawk.

    • Oil, hydraulic fluid, leh amine te laka invenna tha zawk.

    • Tensile chakna sang tak leh hahna tuar thei.

    • Gas-te laka permeability hniam tak.

  • A thatna:

    • Hun rei tak chhung chemical na tak tak a tawh avangin elasticity a nei reng.

    • Thil awmdan khirh takah chuan NBR aiin dam rei zawk.

  • Dilna: 1.1.

    • Oil leh gas laihchhuahna hmanrua (packer, seal).

    • Automotive timing belt, fuel injection components, leh turbocharger seal te pawh a awm bawk.

    • Industrial hydraulic cylinder te pawh a awm bawk.

4. Silicone rubber (VMQ) a ni.

  • Thil neih:

    • Ultra-wide temperature range (-60°C atanga +200°C) a ni.

    • elasticity sang (1000% elongation thleng) a ni.

    • Electrical insulation tha tak leh thermal stability tha tak a nei bawk.

    • Biocompatible leh inert a ni.

  • A thatna:

    • Cryogenic leh high-temperature environment-ah pawh flexibility a nei reng.

    • UV, ozone, leh khaw lum leh khaw vawt laka inven theih a ni.

  • Dilna: 1.1.

    • Damdawi hmanrua (catheter, implant) te pawh a awm thei.

    • Electronic components (insulator, keypad) te pawh a awm bawk.

    • Oven leh engine atana hman tur gasket temperature sang tak.

5. Fluorosilicone rubber (FVMQ) a ni.

  • Thil neih:

    • FKM chemical resistance leh VMQ flexibility te a hmang dun a ni.

    • A lumna hmun: -50°C atanga +230°C thleng a ni.

    • Fuel, lubricant leh hydraulic fluid te laka inven theih a ni.

    • Compression set hniam leh resilience tha tak a ni.

  • A thatna:

    • High-temperature leh low-temperature extreme-ah te a thawk thei.

    • Aviation fuel-a swelling lakah a do thei.

  • Dilna: 1.1.

    • Vanlawng fuel system component hrang hrang (valve, seal) te.

    • Tuipui thuk takah tui hnuaia awm gasket leh connector te.

    • Automotive sensor leh emission control system te a awm bawk.

6. Ethylene propylene diene monomer (EPDM) a ni a, a man pawh a tlawm hle.

  • Thil neih:

    • Ozone leh khaw lum leh khaw vawt laka inven theihna ropui tak a ni.

    • Dielectric chakna sang tak leh tui laka inven theihna.

    • A lumna hmun: -50°C atanga +150°C thleng a ni.

    • Gas permeability hniam tak a awm.

  • A thatna:

    • Pawn lama hmanna atan chuan a man tlawm ber.

    • Vibration damping tha tak leh noise reduction tha tak a ni.

  • Dilna: 1.1.

    • Automotive weatherstripping, radiator hose, leh windshield seal te a awm bawk.

    • Roofing membrane leh pond liners te a awm bawk.

    • Electrical cable insulation leh power transmission belt te a awm bawk.


  • A rilru a buai em em a, a rilru a hah em em bawk a. HNBR synthetic rubber .
    A rilru a buai em em a, a rilru a hah em em bawk a. HNBR synthetic rubber .
    Product Overview: High-Strength Oil-Resistant Medium-Saturation HNBR Synthetic Rubber

    Kan Medium-Saturation HNBR Synthetic Rubber hi oil-exposed leh high-stress industrial environment-a performance danglam tak pe thei tura engineer a ni. 34% acrylonitrile content neiin, he hydrogenated nitrile rubber (HNBR) hian oil resistance tha zawk a pe a, chutih rualin flexibility leh durability a vawng reng a, hei hian seal, gasket, leh components te tan pawh a tha hle a, hnathawhna hmun harsa takah pawh a tha hle.

    Technical Specifications pawimawh ber ber:
    - Acrylonitrile Content: 34% – Oil resistance balanced leh temperature hniam taka flexibility atana tha ber.
    - Mooney Viscosity (ML 1+4 @125°C): 70-90 – Moulding leh extrusion atan processability tha tak a siam.
    - Iodine Absorption Value: 11-22 – Chemical stability tihchangtlunna tur leh tar chak lohna tur controlled medium saturation a lantir.
    - Hardness: Application hrang hrang mamawh phuhruk nan range (eg, 60-90 Shore A) siamrem theih.
     
  • GA-9440 Silicone Rubber hmanga Cable hmanrua (platinum) (HCR) hmanga siam a ni.
    GA-9440 Silicone Rubber hmanga Cable hmanrua (platinum) (HCR) hmanga siam a ni.
    Product Description: Platinum Curing High VoltageReSistant silicone rubber tihdamna.  
    A hmanna tur pawimawh: Cable sleeve lum tak, a lum theih loh, 4Communication.  
    Thil pawimawh: Extrusion molding, high tensile, highelongation, high tea「strength,tlemte deformation, passthe authentication of ROHS and reach
     
    cable accessories atana high-performance silicone rubber siamtu rintlak tak kan ni. Kan GA-9440 Silicone Rubber for Cable Accessories (Platinum) (HCR) hi cable hmanna hrang hrang atana durability tha tak leh flexibility tha tak pe thei turin engineer a ni. Cable industry mamawh khauh tak phuhruk thei tur, size leh specification hrang hrang pe thei silicone rubber product quality sang tak siam chhuah kawngah kan specialise a ni.
  • GA-88×× Translucent hmanga meialh chhuak thei silicone rubber (HCR)
    GA-88×× Translucent hmanga meialh chhuak thei silicone rubber (HCR)
    A hman dan: Compression molding, extrusion, leh calendaring method hmanga flame-retardant product chi hrang hrang siam chhuahna atan a tha.
    Thil pawimawh: halogen tel lo meialh-retardant,flame retardancy tha tak, curing system wideadaptability, ROHs leh reach authentication pass.
     
    Shanghai Herchy Rubber Co., Ltd hi silicone rubber products tha tak tak siamtu leh supplier zingah a langsar ber a ni. Industry hrang hrangte tana solution tha leh thar siam chhuah kawngah kan specialise a, customer tinte mamawh danglam bik phuhrukna tur kan ngaihtuah a ni. I kawppui rintlak tak kan nih angin GA-88×× Translucent Flame-Retardant Silicone Rubber (HCR) kan pe a, industry standard khauh tak zawm tur leh i thil siamte performance tihsan theihna tura duan kan pe a ni.
  • GA-91X1 antistatic silicone rubber (a awm theih loh silica) (HCR)
    GA-91X1 antistatic silicone rubber (a awm theih loh silica) (HCR)
    Shanghai Herchy Rubber Co., Ltd. ah hian premium high-consistency rubber (HCR) products kan pe a, chu chu industry tha zawk leh rintlak zawk mamawhtu industry tan a tha hle. Kan GA-91X1 product hian antistatic property hmasawn tak tak a integrate a, electrostatic discharge laka venhimna danglam tak a pe a ni. Precipitated silica dah belh a nih avangin rubber hian mechanical property tha tak tak a vawng reng a, tensile strength sang tak leh resilience sang tak a nei bawk. Electronic application atana material i mamawh emaw, seal emaw, precision component dang emaw i mamawh emaw, product tin hian industry standard a tlin a, i mamawh bik ang zela siam a nih theih nan kan enkawl a ni.
  • GA-30×3 Silicone Rubber (fumed Silica) hmanga siam a ni a, a resilience sang (HCR) a ni.
    GA-30×3 Silicone Rubber (fumed Silica) hmanga siam a ni a, a resilience sang (HCR) a ni.
    A hman dan: high grade seal, mat, sports cushion leh high resilience product dangte.
    Key features: resilience sang tak, processab小ty tha tak,RoHS,REACH, leh LFGB authentication pass.
     
    Shanghai Herchy Rubber Co., Ltd. hi rubber compound tha tak tak siamtu leh supplier i rintlak tak a ni a, GA-30×3 Silicone Rubber (fumed Silica) with High Resilience (HCR) siamna lama tui tak a ni. Kan company hian i mamawh leh mamawh bikte phuhrukna tur thil danglam tak tak kan rawn thawn chhuak thin a
  • GA-33×1 Silicone Rubber (fumed Silica) (HCR) hmanga siam, a langtlang thei hle.
    GA-33×1 Silicone Rubber (fumed Silica) (HCR) hmanga siam, a langtlang thei hle.
    A hman dan: nipple, sundries transparent sang tak leh hriselna atana hman tur thil.
    Key features: transparence sang, chakna sang, processability tha tak,RoHS, REACH, leh LFGB authentication pass.
     
    GA-33×1 Highly Transparent Silicone Rubber (fumed Silica) (HCR) siamtu leh supplier rintlak tak kan ni. Silicone rubber product langtlang, performance sang tak mamawh industry te tan tailored solution kan pe thin. Kan team hian i project mamawh phuhruk turin specification dik tak nei silicone rubber an siam thei a ni. Technology hmasawn leh expert engineer te hmangin quality sang ber leh rang ber delivery kan nei thei a ni.

QUICK LINKS A AWM VE ANG

KAN THIL THLENG TE

CONTACT THIL AWM DAN

Add: No.33, Lane 159, Taiye kawngpui, Fengxian District, Shanghai-a awm a ni
Tel / WhatsApp / Skype: +86 15221953351 ah zawhfiah theih a ni
E-mail hmangin:  info@herchyrubber.com
A rilru a hah   lutuk chuan a rilru   2023 a buai em em a. Shanghai Herchy Rubber Co., Ltd. Sitemap a ni |   Thuruk humhalh dan tur | Support By Leadong a ni.