Categories .

Fa kyɛ:

FV9700 Fluorosilicone a wɔde yɛ aduru

Saa ade yi fata ma extrusion molding of bis-disulfide. Ɛwɔ ngo a ɛko tia, solvent a ɛko tia, acid ne alkali a ɛko tia.

Adeɛ	Nneɛma a wɔde kyerɛ
	Serial nɔma a wɔde di dwuma	NFS9760 na ɛwɔ hɔ	NFS9770 na ɛwɔ hɔ
	Mmaeɛ Akwan a Wɔfa so Sɔ Sɔhwɛ	Translucent, ɛyɛ torotoro, . Efĩ biara nni hɔ
Nneɛma a ɛtwe ade ba fam pɔtee/ g/cm³	ASTM D792 na ɛwɔ hɔ	1.44	1.48
Nneɛma a ɛyɛ den/mpoanoA	ASTM D2240 na ɛwɔ hɔ	60	70
Tensile Ahoɔden/MPa	ASTM D412 na ɛwɔ hɔ	10.5	10.1
Elongation Wɔ Ahomegye Mu /% .	ASTM D412 na ɛwɔ hɔ	207	201
Nsuo Ahoɔden/KN/m	ASTM D624-B na ɛwɔ hɔ	18	17
Nhyɛso Set (177 ° C * 22h) .	Hardness nsakrae/A	+4	+5
	Nsakrae a ɛba wɔ tensile ahoɔden mu/% .	-27	-24
	Nsakrae a ɛba wɔ elongation mu/% .	-26	-23
Petrol a wɔde yɛ C Volume Nsakrae/% . 23°C/72h na ɛwɔ hɔ	ASTM D471 na ɛwɔ hɔ	21	20
IRM903 Nsakraeɛ dodoɔ a ɛwɔ dodoɔ mu/% 150°C×72h	ASTM D471 na ɛwɔ hɔ	4.5	4
Nitric acid/sulfuric acid/hydrochloric acid a wɔde afrafra aduru PH!1 100°C×120h
Acid a ɛko tia Volume nsakraeɛ dodoɔ/% .	ASTM D471 na ɛwɔ hɔ	0.3	0.3
3% sodium hydroxide aduru 60°C × 72h
Alkali a ɛko tia Volume nsakraeɛ dodoɔ/% .	ASTM D471 na ɛwɔ hɔ	0.4	0.3
Tebea a Wɔde Sa Ayaresa	bisditetra afã horow 0.8, vulcanisation a ɛyɛ ɔfã biako 120°C×15min, vulcanisation a ɛwɔ afã abien: 200°C×4h

Nneyɛe a wɔkamfo kyerɛ:

Wɔhyɛ nyansa sɛ wɔmfa bisdisulfide (2,5-dimethyl-2,5-bis(tert-butylperoxy)hexane) afã horow 0.4-0.7 nni dwuma.

Ɛsɛ sɛ adetɔfo paw ɔhyew ne bere a ɛfata sen biara a wɔde bɛsa yare no gyina aduru no kɛse ne ɔkwan a wɔfa so sa yare no so.

Nneɛma a wɔde kyekyere nneɛma:

Saa ade yi nyɛ asiane, mmom ɛyɛ cardstock, plastic, ne kilogram 10 wɔ bag biara mu, bag 2 wɔ adaka biara mu.

Mfe a wɔde sie:

Saa ade yi wɔ awɔw mu nsu a ɛsen, ɛsɛ sɛ wɔkwati bag no sɛnea ɛbɛyɛ a ɛrensɛe bere a wɔde rekɔ anaasɛ wɔde redi dwuma no.

Fa sie baabi a ɛhɔ yɛ nwini na ɛhɔ yɛ kusuu a ɛtra hɔ asram 12.

Dada:

Deɛ ɛdi hɔ:

FV9600 fluorosilicone .