TEL: +8615221953351 E-mail: info@herchyrubber.com a ni.
Please Choose Your Language
thil siam chhuah .
I awm a ni: In » thil siam chhuah te . » Synthesis Rubber

Synthetic Rubbers: A nihna leh a thatna chipchiar tak tak, a hmanna tur leh a hman dan tur te

1. Fluororubber (FKM) a ni a, a man pawh a to hle.

  • Thil neih:

    • A lumna a nasa lutuk (-20°C atanga +250°C thleng).

    • Oil, fuel, solvent, acid leh base te laka invenna danglam tak.

    • Tensile chakna sang, compression set hniam, leh chemical stability tha tak a nei bawk.

    • meialh laka inven theih leh ozone laka inven theih a ni.

  • A thatna:

    • Chemical leh pressure sang tak tak awmna hmun a tuar thei.

    • Aerospace leh automotive application-a service dam rei tawh.

  • Dilna: 1.1.

    • Aircraft fuel system seal, O-rings, leh gasket te.

    • Automotive transmission seal te, engine hose te, leh turbocharger component te a awm bawk.

    • Chemical processing hmanrua lining leh gasket te.

2. Chloroprene rubber (CR) a ni.

  • Thil neih:

    • Oil resistance moderate (natural rubber aiin a tha zawk mahse FKM aiin a tlem zawk).

    • Flame retardant leh mahni inhnukdawk theihna nei.

    • Khaw lum leh khaw vawt laka invenna tha (UV, ozone, leh tuihna).

    • Temperature hniam (-40°C atanga +120°C) ah pawh a inthlak thei.

  • A thatna:

    • Cost-effective leh processing awlsam tak (extrusion/molding) a ni.

    • Mechanical strength sang tak leh abrasion resistance.

  • Dilna: 1.1.

    • Wet suit, gloves, leh industrial hose te pawh a awm bawk.

    • pheikhawk leh sakna tur adhesives.

    • Cable jacket leh roofing membrane te a awm bawk.

3. Hydrogenated nitrile rubber (HNBR) a ni.

  • Thil neih:

    • NBR nena khaikhin chuan heat resistance (+150°C thleng) a tichak zawk.

    • Oils, hydraulic fluids, leh amine te laka invenna tha zawk.

    • Tensile chakna sang tak leh fatigue resistance.

    • Gas-te tana permeability hniam.

  • A thatna:

    • Hun rei tak chhung chemical na tak tak a tawh avangin elasticity a nei reng.

    • Extreme condition-ah chuan NBR aiin a dam rei zawk.

  • Dilna: 1.1.

    • Oil leh gas drilling hmanrua (packers, seals) te.

    • Automotive timing belt, fuel injection components, leh turbocharger seal te pawh a awm bawk.

    • Industrial hydraulic cylinder te pawh a awm bawk.

4. Silicone rubber (VMQ) a ni.

  • Thil neih:

    • Ultra-wide temperature range (-60°C atanga +200°C) a ni.

    • elasticity sang (1000% elongation thleng) a ni.

    • Electrical insulation tha tak leh thermal stability tha tak a nei bawk.

    • Biocompatible leh inert a ni.

  • A thatna:

    • Cryogenic leh high-temperature environment-ah pawh flexibility a nei reng.

    • UV, ozone, leh khaw lum leh khaw vawt laka inven theih a ni.

  • Dilna: 1.1.

    • Damdawi hmanrua (catheter, implant) te pawh a awm thei.

    • Electronic components (inculator, keypad) te pawh a awm thei.

    • Oven leh engine siamna tur gasket sang tak tak a awm bawk.

5. Fluorosilicone rubber (FVMQ) a ni.

  • Thil neih:

    • FKM chemical resistance leh VMQ flexibility te a hmang dun a ni.

    • A lumna hmun: -50°C atanga +230°C thleng a ni.

    • Fuel, lubricant leh hydraulic fluid te laka inven theih a ni.

    • Compression set hniam leh resilience tha tak.

  • A thatna:

    • High-temperature leh low-temperature extreme-ah te a thawk thei.

    • Aviation fuel-a swelling do thei.

  • Dilna: 1.1.

    • Aircraft fuel system components (valve, seals) te.

    • Tuipui thuk takah tui hnuaia awm gasket leh connector te.

    • Automotive sensor leh emission control system te a awm bawk.

6. Ethylene propylene diene monomer (EPDM) a ni a, a man pawh a tlawm hle.

  • Thil neih:

    • Ozone leh khaw lum leh khaw vawt laka inven theihna ropui tak a ni.

    • Dielectric chakna sang tak leh tui laka inven theihna.

    • A lumna hmun: -50°C atanga +150°C thleng a ni.

    • Gas permeability hniam tak a awm.

  • A thatna:

    • Pawn lama hmanna atan chuan a man tlawm ber.

    • Vibration damping tha tak leh noise reduction tha tak a ni.

  • Dilna: 1.1.

    • Automotive khaw lum leh khaw vawt, radiator hose, leh windshield seal te pawh a awm bawk.

    • roofing membrane leh pond liners te a awm bawk.

    • Electrical cable insulation leh power transmission belt te a awm bawk.


  • GA-8153P ceramic silicone rubber (HCR) a ni a, a hmanna tur hmun a awm lo.
    GA-8153P ceramic silicone rubber (HCR) a ni a, a hmanna tur hmun a awm lo.
    Industrial application mamawh tak takte tana GA-8153P ceramic silicone rubber tha tak pek kawngah kan specialise a ni. Kan thil siam dan hmasawn tak takte hian industry hrang hrang tan custom silicone rubber solution siam theihna hun min pe a ni. Hardness bik, tensile strength, emaw tailored dimensions emaw i mamawh a nih pawhin, i specification dik tak zawm turin kan inpeih reng a ni.

    Kan GA-8153P ceramic silicone rubber hian thermal stability tha tak a nei a, a chhe thei lo bawk. Extreme conditions hnuaia perform thei tura duan a nih avangin automotive, aerospace, leh manufacturing sector-ah te hman a ni nasa hle. A chakna leh a nghetna a tihpun avangin he material hian boruak khirh takah hun rei tak chhunga hnathawh theihna a siam a ni.

    Silicone rubber supplier lar tak kan nih angin quality tihchhiat lohvin competitive pricing kan pe thei dawn a ni. Kan factory hian hmanraw tha ber ber leh quality control khauh tak hmangin silicone rubber product tha ber ber a siam chhuak thin. Thil mamawh bik i neih chuan custom formulations leh quick lead times hmanga i sumdawnna kan thlawp thei hi kan lawm hle.
  • GA-32×0 A tum tlangpui silicone rubber (FUMED SILICA) (HCR)
    GA-32×0 A tum tlangpui silicone rubber (FUMED SILICA) (HCR)
    A hman dan: Sheath chi hrang hrang, kitchenware, purse, watchbandand thil dang pangngai siam chhuahna atan a tha.
    Key Features: Curing speed chak, chakna sang, processability tha tak,rohs, reach, leh LFGB te authentication pass.
     
    Shanghai Herchy Rubber Co., Ltd hi silicone rubber product quality tha tak tak siamtu zingah a langsar ber a ni. I mamawh bik phuhruk thei tura siam, general-purpose silicone rubber solution hrang hrang siamah kan specialise a ni. Production technology hmasawn tak tak leh mithiam team te nen chuan performance silicone rubber tha zawk kan pe a, chu chu a chhe thei lo, a inthlak thei a, industry standard sang ber a tlin bawk. Vawiin hian i product mamawh min thawn la, i application atan solution tha ber kan rawn pe ang che.
  • GA-31×0 silicone rubber a ni a, a mittui a tla sang hle (fumed silica) (HCR)
    Silicone rubber a ni a, a mittui chakna a sang (fumed silica) (HCR)
    A hman dan: Auto parts leh thil dang chi hrang hrang special high strength
    key features: Tear strength sang, processability tha tak, authentication OFROHS, reach, leh LFGB te.
     
    GA-31×0 Silicone Rubber with high tear strength (FUMED SILICA) hi advanced elastomer a ni a, industry hrang hrang, performance tha zawk leh durability mamawhna atana siam a ni. Silicone rubber quality sang tak siamtu leh supplier lar tak a nih angin Shanghai Herchy Rubber Co., Ltd. chuan kan khawvel customer-te standard exacting tak ang taka siam thei tur thil rawn thawn chhuah a tum tlat a ni. Kan GA-31×0 silicone rubber hian tear strength sang tak a pe a, fumed silica hmanga tihchak a ni a, stress leh extreme condition hnuaia resilience demand thei application atan a tha hle.

    I mamawh bik ang zela siam, automotive, aerospace, leh electrical application te bakah industry hrang hrangte tana optimal performance neih theihna turin customized solution kan pe a ni. Hun rei tak chhunga hlutna pe thei silicone rubber product chhe thei lo, a chhe thei lo, a chhe thei lo, a chhe thei lo, a chhe thei lo, a chhe thei lo, a chhe thei lo a ni.
  • GA-6061FHTAB A rilru a buai em em a, a rilru a hah em em bawk a.
    GA-6061FHTAB A rilru a buai em em a, a rilru a hah em em bawk a.
    GA-6061FHTAB High Grade Antistatic Silicone Rubber (Natural Color) (HCR) Class E(200°C)
    hman dan: Green Energy High Voltage Shielded Cable siam chhuahna atan a tha a, hightemperature-resistant cable, rail transit cable, 1S06722-1 :2011 (e), leh 1S06722-1 (e), 1S06722-1 (e), leh LV 216;Thlawhna sang leh hniam, extrusionprocessability tha tak,Goodelectrical insulation property 3000h chhunga kal theihna tur chu DCBP leh platinumsystem te pawhin an tidam thei a ni
     
    . Silicone Rubber Static Buildup leh Deliver Reliable Performance Kan Silicone Rubber hi a tha ber a, i mamawh tur a ni.
  • Neoprene/chloroprene rubber -CR .
    Neoprene/chloroprene rubber -CR .
    Neoprene, chloroprene (ie, 2-chloro-1,3-butadiene) alpha-polymerization hmanga siam synthetic rubber chu a raw material ber atan a hmang a ni.A taksa leh mechanical property tha tak, oil resistance, meialh laka inven theihna, meialh laka invenna, ni êng laka invenna, ozone resistance, acid leh alkali resistance leh chemical reagent resistance a nei a ni.
  • FV9700 Fluorosilicone 2019 a ni.
    FV9700 Fluorosilicone 2019 a ni.
    He product hi bis-disulfide extrusion molding atan a tha hle. Oil resistance tha tak a nei a, solvent resistance a nei tha hle a, acid leh alkali resistance a nei tha hle bawk.

Quick Links .

Kan thil siam te .

Contact information te .

Add: No.33, Lane 159, Taiye Road, Fengxian District, Shanghai-a awm chu a ni.
Tel / WhatsApp / Skype: +8615221953351
e-mail hmangin:  info@herchyrubber.com a ni.
A rilru a buai em em a, a rilru a hah em em bawk a   .   2023 Shanghai Herchy Rubber Co., Ltd. Sitemap 100 a ni. |   Privacy Policy | 1000-in a thlawp a ni. Leadong 100 a ni..