Li-rabreber tsa Synthetic: menyetla e qaqileng le lits'ebetso

1. Fluorobber (FKM)

• LITLHAKISO:

• Khanyetso e feteletseng (-20) + 250 ° C ho 250 ° C).

• Khanyetso e ikhethang ho oli, mafura, li-solven, li-acids le likepe.

• Matla a phahameng a lehlasoa, khahlano le khahlano le khatello e tlase le botsitso ba lik'hemik'hale.

• E loantšang malakaba le octiant.

• Melemo:

• E aba li-lik'hemik'hale tse mabifi le libaka tse phahameng tsa khatello.

• Bophelo ba tšebeletso e telele ka aerospace le lits'ebetso tsa koloi.

• Likopo:

• Litiiso tsa moea oa sefofane tsa sefofane, mehele le mabitla.

• Litikhopo tsa sekōpo tsa likoloi, ho felloa ke li-antin le turbotharger.

• Lisebelisoa tsa ho ikoetlisa lik'hemik'hale le li-geros le mabili.

2. Chloroprene Rubber (cr)

• LITLHAKISO:

• Khanyetso ea oli e itekanetseng (e ntle ho feta rabara ea tlhaho empa e tlase ho FKM).

• Lelakapa le kamore e nang le thepa ea ho tlohela thepa.

• Ho hanela ha boemo ba leholimo bo botle ba leholimo (UV, Ozone le mongobo).

• E feto-fetoha le maemo a tlase (-000 ea qubu ea '120 ° C ho 120

• Melemo:

• E theko e boima ka ts'ebetso e bonolo (extrusion / bolding).

• Matla a phahameng a ho hanyetsa le ho hanyetsa.

• Likopo:

• Litumellano tse boima, liatlana le homs tsa indasteri.

• Meriana bakeng sa lieta le kaho.

• Li-Jackete tsa Cable le Membranes.

3. Hydrogensute ea nitrile rubber (hnbr)

• LITLHAKISO:

• Ho ntlafalitse mocheso oa mocheso (ho fihlela ho + 150 ° C) Ha ho bapisoa le NBR.

• Khanyetso e Phahameng ho Alis, Maro a Hydraulic le Imines.

• Matla a phahameng le khatello e phahameng ea ho tepella.

• Ho nepahala ka tlase ho likhase.

• Melemo:

• E boloka elasticity tlasa ho pepesetsoa nako e telele ho li-lik'hemik'hale tse thata.

• E ne e le nako e telele ho feta nBRS maemong a feteletseng.

• Likopo:

• Lisebelisoa tsa oli le tsa khase ea khase (li-packers, litiiso).

• Makhooa a likoloi tsa likoloi, likarolo tsa mafura a mafura, le litina tsa turbogger.

• Li-cylinders tsa hydraulic tsa hydraulic.

4. Silicone Rubber (VMQ)

• LITLHAKISO:

• Ultra-bophara ba mocheso o boima (-60 ° C ho ea 200 ° C.

• Elasticity e phahameng (ho fihlela ho 1000% ea khoeli ea khoeli).

• Khohlofale e ntle ea motlakase le ho tsitsa ho futhumatsang.

• Bicockativeble le ka sekala.

• Melemo:

• E boloka ho fetoha le maemo ho sebaka sa Cryogenic le se phahameng sa mocheso.

• Ho loants'oa UV, Ozone le maemo a leholimo a mangata.

• Likopo:

• Lisebelisoa tsa bongaka (li-catheter, li kenella).

• Metsoako ea elektroniki (inslatletos, keypads).

• Libeke tse phahameng tsa mocheso bakeng sa li-ovens le enjine.

5. Fluorolicone raber (fvmq)

• LITLHAKISO:

• Kopanya likhatiso tsa ckm tsa ckm ea lik'hemik'hale tsa vmq.

• Mocheso oa mocheso: -50 ° C ho 230 ° C.

• Hanyetsa hanela li-thatna, lubricants le maro a Hydraulic.

• Khatello e tlase e tsepamisitse maikutlo le boiketlo bo botle.

• Melemo:

• E etsa ka mocheso o phahameng le o feteletseng oa mocheso.

• Ho hanyetsa ho ruruha ka likhoele tsa ho lifofane.

• Likopo:

• Metsoako ea lifofane tsa mafura (valves, li tiisitsoe).

• Libise tse tebileng tsa Leoatle le Tebileng le Lihokelo.

• Li-sensors tsa likoloi le litsamaiso tsa taolo ea motlakase.

6. Dielene ea Ethylene Dine Monommer (EPDM)

• LITLHAKISO:

• Ho hanyetsa maemo a leholimo a hlahelletseng.

• Matla a phahameng a ho hanyetsa le ho hanyetsa metsi.

• Mocheso oa mocheso: -50 ° C ho ea 150 ° C.

• Ho nepahala ha khase.

• Melemo:

• E theko e boima haholo bakeng sa lits'ebeliso tsa kantle.

• Ho fokotseha hamolemonyana le ho fokotsa lerata.

• Likopo:

• Likoloi tsa mechini e tsamaisang thepa, li-radiator le li-a windshital li-andshital.

• Membrane ea marulelo le polasi ea pond.

• Khoele ea khoele ea motlakase le mabanta a phetiso ea matla.