Kɔmpawnd Rɔba: Ditayl Prɔpati, Advantej, ɛn Aplikeshɔn
Prɔpati dɛn:
Ekstrim tempɔret rɛsistɛns (-20°C to +250°C).
Eksepshɔnal resistans to ɔyl, fiul, sɔlvɛnt, asid, ɛn bays.
Hεy tεnsil strεngth (10–20 MPa), lכw kכmpreshכn sεt (<15% na 150°C/70h).
Flame retardant (UL94 V-0 raytin) ɛn ɔzon-resistant.
Di bɛnifit dɛn we pɔsin kin gɛt:
Prε-blεnd wit kכraytiv dεm (εgz., bisfεnol AF, pεrכksayd) fכ efyushכn vulkanayzεshכn.
Ritain dimenshכnal stεbiliti in agresiv kεmikכl envayroment.
FDA-kɔmpliant gred dɛn we de fɔ it/mɛdikal kɔntakt.
Aplikeshɔn dɛn:
Aerospace: Fiul sistem O-ring, injin sil, ɛn dayafragm.
Otomotiv: Turbocharger gasket, transmishɔn sil, ɛn fiul injɛkta.
Kεmikכl: Pɔmp layn, valv sit, ɛn hos asɛmbli.
Prɔpati dɛn:
Hεt rεsistεns te to +150°C (intamitεnt +175°C).
Supiriɔr rɛsistɛns to ɔyl, amin, ɛn haydrolik fluid.
Ay tɛnsiɛl trɛnk (15–35 MPa) ɛn taya rɛsistɛns.
Low permeabiliti fɔ gas dɛn.
Di bɛnifit dɛn we pɔsin kin gɛt:
Pre-vulcanized fɔ ridyus prɔsesin tɛm.
Mentεn εlastikiti כnda lכng εkspכzishכn to harsh mεdia.
Dɛn kin gɛt am insay gred dɛn we dɛn kin yuz pɔroksayd ɔ sɔlfɔ.
Aplikeshɔn dɛn:
Oil & Gas: Drlin pak, mud pɔmp sil, ɛn wɛlhɛd kɔmpɔnɛnt dɛn.
Otomotiv: Tayming bɛlt, fiul injɛkshɔn sistem, ɛn tɔbochaja hos.
Industrial: Haydrolik silinda sil ɛn giabɔks kɔmpɔnɛnt dɛn.
3. NBR Kɔmpawnd (NBR) .
Prɔpati dɛn:
Modaret ɔyl rɛsistɛns (bɛtɛ pas EPDM, smɔl pas HNBR).
Tɛmpratura rɛnj: -40°C to +120°C.
Hεy abrashכn rεsistεns (ASTM D5963: 100–200 mm3 lכs).
Gud resiliens ɛn kɔmpreshɔn sɛt rɛsistɛns.
Di bɛnifit dɛn we pɔsin kin gɛt:
Aplikeshɔn dɛn:
Otomotiv: Fiul hos, O-ring, ɛn transmishɔn sil.
Indastrial: Kɔnvayɔ bɛlt, printin rɔla, ɛn haydrolik sil.
Di pɔsin we de yuz am: Latɛks glɔv ɛn spɔt ikwipmɛnt.
Prɔpati dɛn:
Outstanding ozon/weather resistance (5,000+ awa insay QUV tɛst).
Tempracha renj: -50°C to +150°C.
High dielectric strength (20–30 kV/mm) ɛn wata impermiabiliti.
Low gas permeabiliti.
Di bɛnifit dɛn we pɔsin kin gɛt:
Aplikeshɔn dɛn:
Ɔtomotiv: Doa sil, redyuta hos, ɛn injin mawnt.
Kɔnstrɔkshɔn: Ruf mɛmbran, pɔnd layna, ɛn winda gasket.
Ilɛktrik: Kebul insuleshɔn ɛn pawa transmishɔn bɛlt dɛn.
5. MPU Kɔmpawnd (MPU) .
Prɔpati dɛn:
hεy tεnshכnal strכng (20–60 MPa) εn εlastik (up to 800% εlongεshכn).
Eksepshɔnal abrashɔn rɛsistɛns (ASTM D5963: 20–50 mm3 lɔs).
Tεmpratura rεnj: -40°C to +100°C (up to +120°C wit hεt stεbyulayzεr).
Resistant to solvent ɛn haydrolis.
Di bɛnifit dɛn we pɔsin kin gɛt:
Hardness we yu kin kɔstɔmayz (Shore A 50–95).
Dɛn kin gɛt am insay kas, mil, ɔ tɛmplastik gred.
Aplikeshɔn dɛn:
Indastrial: Wil, rɔla, ɛn kɔnvayɔri bɛlt.
Ɔtomotiv: Sɔspɛns bush, shɔk absɔba, ɛn CV jɔyn but.
Mɛdikal: Kateta, ɔtpidik bres, ɛn prostɛtik.
6. ACM Kɔmpawnd (ACM) .
Prɔpati dɛn:
Kɔntinyu fɔ rɛsistɛns ɔt te to +150°C (intamitɛnt +175°C).
Eksɛlɛnt rɛsistɛns to ɔtomɛtik transmishɔn fluid (ATF), ɔyl, ɛn ɔt.
Modaret ozone ɛn wɛda rɛsistɛns.
Tεnsil strכng: 7–15 MPa.
Di bɛnifit dɛn we pɔsin kin gɛt:
Aplikeshɔn dɛn:
Otomotiv: Transmishɔn sil, O-ring, ɛn pɔmp dayafragm.
Pawa stiarin sistem komponent dɛn.
Industrial: Pɔmp sil fɔ ɔyl-based midia.
7. AEM Kɔmpawnd (AEM) .
Prɔpati dɛn:
Waid tɛmpracha rɛnj (-40°C to +150°C).
I nɔ ebul fɔ gɛt ɔyl, glycol, ɛn di wɛda.
High tensile strength (10–20 MPa) ɛn kɔmpreshɔn sɛt rɛsistɛns.
Low permeabiliti fɔ gas dɛn.
Di bɛnifit dɛn we pɔsin kin gɛt:
Balans di ɔt rɛsistɛns ɛn fleksibiliti.
I nɔ de gri wit haydrolis ɛn ol.
Dɛn kin gɛt am insay gred dɛn we dɛn kin yuz pɔroksayd ɔ sɔlfɔ.
Aplikeshɔn dɛn:
Otomotiv: Redyator hos, kulant sistem komponent, ɛn air intake hos.
Indastrial: Kɔnvayɔ bɛlt fɔ kemikal handel ɛn pɔmp dayafragm.
HVAC: Dakt gasket ɛn vaybreshɔn ayzolatɔ.
