Lastikuw faralen ɲɔgɔn kan: a ka jogo ɲumanw, a nafaw, ani a kɛcogo .

1. FKM fɛnɲɛnamafagalan (FKM) .

Bolo fɛnw:

• Funteni hakɛ min bɛ se ka kɛ a la kosɛbɛ (-20°C fo +250°C).

• Tuluw, fɛnɲɛnamafagalanw, furajiw, asidiw ani basiw kɛlɛli danfaralen.

• Tensile fanga ka bon (10–20 MPa), degun set dɔgɔman (<15% 150°C/70H).

• Flame Retardant (UL94 V-0 jate) ani ozɔni tɛ se ka kɛ.

Nafaw:

• Aw bɛ a wuli ka kɔn a ɲɛ ni furakɛlifɛnw ye (misali la, bisfenɔli AF, perokisidi) walasa ka vulkanizasiyɔn kɛ ka ɲɛ.

• A bɛ dimension stabilité mara kemikɛli sigida juguw la.

• FDA-compliant grades bɛ sɔrɔ dumuni/dɔgɔtɔrɔso la.

Aplikasi:

• Aerospace: Fuel System O-rings, motɛriw sigilanw, ani u dawolo.

• Mobili: turbochargeur gaskets, transmission sigilanw, ani fɛnɲɛnamafagalan pikirijikɛlanw.

• kemikaliya: Pompiw, sumanw sigilanw, ani hose lajɛw.

2. HNBR ka fɛnɲɛnamafagalan (HNBR) .

Bolo fɛnw:

• Sumaya bɛ se ka kɛ ka se +150°C ma (a tɛ kɛ +175°C ye).

• Tuluw, amine ani jibolisiraw ka se ka u yɛrɛ tanga kosɛbɛ.

• Tensile fanga ka bon (15–35 MPa) ani sɛgɛn kunbɛnni.

• A bɛ se ka don gaziw la.

Nafaw:

• Pre-Vulcanized ka ɲɛsin baarakɛwaati dɔgɔyali ma.

• A bɛ elasticité mara ka mɛn ni a bɛ sɔrɔ media gɛlɛnw na.

• A bɛ sɔrɔ perokisidi- walima kisɛkisɛ la.

Aplikasi:

• Tumu & Gazi: Drilling pakew, bɔgɔ pɔnpe sigilanw, ani kɔlɔnw yɔrɔw.

• Mobili: Waati cɛsirilanw, fɛnɲɛnamafagalanw pikiri kɛcogo, ani turbochargeur hoses.

• Industrie: Silindri hydrauliques ani gearbox yɔrɔw.

3. NBR ka fɛnɲɛnamafagalan (NBR) .

Bolo fɛnw:

• Tumu kɛlɛli damatɛmɛnen (a ka fisa ni EPDM ye, a ka dɔgɔn ni HNBR ye).

• Funteni hakɛ: -40°C fo +120°C.

• Abrasion resistance ka bon (ASTM D5963: 100–200 mm3 bɔnɛ).

• Resilience ɲuman ani compression set resistance.

Nafaw:

• A musaka ka dɔgɔ ni a dilanni ka ɲi kosɛbɛ.

• Akirilonitirili hakɛ min bɛ se ka kɛ ka kɛɲɛ ni mɔgɔw sago ye (18–50%) walasa ka tulumafɛnw kunbɛn.

Aplikasi:

• Mobili: fɛnɲɛnamafagalan, O-ringw, ani transmission sigilanw.

• Industrie: Conveyor cɛsirilanw, sɛbɛnnikɛminɛnw, ani jisigiyɔrɔw.

• Kunnafoni-falen-falen: Latex glovew ni farikoloɲɛnajɛ minɛnw.

4. EPDM fɛnɲɛnamafagalan (Etilɛni propilɛni diene monomɛri) .

Bolo fɛnw:

• Ozone/weather resistance (lɛrɛ 5000+) min ma ɲɛ QUV sɛgɛsɛgɛli la).

• Funteni hakɛ: -50°C fo +150°C.

• Dielektriki fanga ka bon (20–30 kV/mm) ani ji impermeability.

• Gazi doncogo dɔgɔyali.

Nafaw:

• Aw bɛ a labɛn ka ɲɛ ni farikolo tangalanw ni UV sabatilifɛnw ye.

• Yɛrɛyɛrɛli damping ɲumanba (bɔnɛfɛn: 0,1–0,3).

Aplikasi:

• Mobili: Datugulanw, radiyatɛriw, ani motɛriw.

• A jɔli: so sanfɛlanw, kɔw sirilanw, ani finɛtiriw.

• Kuran: Kabɛl insulasi ani fanga jiginni cɛsirilanw.

5. MPU fɛnɲɛnamafagalan (MPU) .

Bolo fɛnw:

• Tensile fanga ka bon (20–60 MPa) ani elasticity (ka se 800% janya ma).

• Abrasion resistance exceptionnel (ASTM D5963: 20–50 mm3 bɔnɛ).

• Funteni hakɛ: -40°C fo +100°C (fo +120°C ni funteni sabatililanw ye).

• A bɛ se ka furajiw ni jilafɛnw kɛlɛ.

Nafaw:

• Gɛlɛya min bɛ se ka ladilan (Kɔgɔda A 50–95).

• A bɛ sɔrɔ cast, millable, walima thermoplastique grades la.

Aplikasi:

• Industrie: Wheels, Rollers, ani Conveyor Belts.

• Mobili: Bushings suspensions, shock absorbers, ani CV joint boots.

• Furakɛcogo: katetɛriw, kolotugudaw, ani prothèse.

6. ACM fɛnɲɛnamafagalan (ACM) .

Bolo fɛnw:

• Funteni kunbɛncogo min bɛ to sen na fo ka se +150°C ma (a bɛ kɛ ni +175°C ye).

• A bɛ se ka a yɛrɛ tanga fɛn caman ma minnu bɛ se ka kɛ ka fɛnw wuli (ATF), tuluw, ani funteni.

• Ozone damatɛmɛnen ani waati cogoya.

• Tensile fanga: 7–15 MPa.

Nafaw:

• Aw bɛ a wuli ka kɔn a ɲɛ ni amina walima perokisidi furakɛli ye walasa ka kɛnɛya teliya.

• A bɛ dimension stabilité mara ATF sigidaw la.

Aplikasi:

• Mobili: Transmission sigilanw, O-rings, ani pɔnpew.

• Seko ni dɔnko siratigɛ yɔrɔw.

• Industrie: Pompi sigilanw ka ɲɛsin tulumafɛnw ma.

7. AEM fɛnɲɛnamafagalan (AEM) .

Bolo fɛnw:

• Funteni hakɛ caman (-40°C fo +150°C).

• Tuluw, glycols ani weathering ka se ka a yɛrɛ tanga.

• Tensile fanga ka bon (10–20 MPa) ani compression set resistance.

• A bɛ se ka don gaziw la.

Nafaw:

• A bɛ balansi don funteni kunbɛnni ni a sɛgɛsɛgɛli la.

• A bɛ se ka jilafɛnw ni kɔrɔya kunbɛn.

• A bɛ sɔrɔ perokisidi- walima kisɛkisɛ la.

Aplikasi:

• Mobili: radiyatɛriw, nɛnɛmadalanw yɔrɔw, ani fiɲɛ minɛyɔrɔw.

• Industrie: Conveyor cɛsirilanw ka ɲɛsin kemikɛli ma ani pɔnpew ma.

• HVAC: Duct gaskets ani vibration isolateurs.