Kategori dɛn .

Share to:

Etilen Propilen Rɔba-EPDM/EPM

Ethylene propylene rubber na sintetik rɔba wit ethylene ɛn propylene as di men monomer, akɔdin to di difrɛn kɔmpɔzishɔn fɔ di monomer na di molecular chen, na binary ethylene propylene rubber(EPM) ɛn teshaary ethylene propylene rubber(EPDM) de.

Di tin dɛn we yu kin gɛt:

Kwantiti: .



Aks fɔ aks kwɛstyɔn dɛn . Add to basket .

Etilɛn Prɔpilin Rɔba – EPDM/EPM

Di men pefɔmɛns advantej dɛm fɔ EPDM na dɛn wan ya.

(1) Ay kɔst pefɔmɛns, wit raw rɔba dɛnsiti we na 0.86-0.90g/cm3 nɔmɔ, we na di laytest kɔmɔn rɔba wit raw rɔba dɛnsiti; ɛn dɛn kin put am na bɔtul bɔku bɔku wan fɔ mek dɛn nɔ spɛn bɔku mɔni fɔ yuz rɔba.

(2) Eksɛlɛnt rɛsistɛns fɔ ol, weda rɛsistɛns, ɔzon, san layt, ɔt rɛsistɛns, wata rɛsistɛns, wata vaypa rɛsistɛns, UV rɛsistɛns, redyushɔn rɛsistɛns ɛn ɔda ol prɔpati dɛn. we dεn yuz EPDM wit כda כnsatyuret dayεn rכba dεm lεk NR, SBR, BR, NBR, CR, εtk, i kin akt lεk polimכr antioksidant כ anti-aging ejen.

(3) Eksɛlɛnt kemikal rɛsistɛns, asid, alkali, ditajɛnt, animal ɛn vɛjitebul ɔyl, alkol, kitɔn, ɛn ɔda tin dɛn; fayn fayn wata rɛsistɛns, wata we dɔn ɔt pasmak, wata vaypa rɛsistɛns; polar ɔyl rɛsistɛns.

(4) Eksɛlɛnt insuleshɔn pefɔmɛns, volyum rɛsistiviti 1016Ω-cm, brekdɔwn vɔlɔt 30-40MV/m, dayelɛktrik kɔnstant (1kHz, 20°C) 2.27.

(5) Waid opareshɔn tɛmpracha rɛnj, minim ɔpreshɔn tɛmpracha -40-60°C, kin yuz fɔ lɔng tɛm dɔŋ 130°C.

Hirsch Rubber de ɛkspɔt EPDM/EPM to 15 kɔntri dɛn we inklud Amɛrika, Rɔshia, Brazil, Ajentina, Sawt Koria, Jamani, Itali, Spen, Ɔstrelia, ɛn India.

Etilen Propilen Rɔba-EPDM/EPM

Herchy na di .	Mooney viskositi we de na di bɔdi	Mooney viskositi we de na di bɔdi	Mooney viskositi we de na di bɔdi	Ethylene we de insay di tin	ENB Di tin dɛn we de insay	Ekstend-ɔyl Kɔntinɛnt	Aplay fɔm	Karakta
Mak	ML(1+4)100°C na di wan	ML(1+4)125°C na di wan	ML(1+4)150°C na di wan	wt% .	wt% .	PHR we dɛn kɔl PHR	Aplay fɔm	Karakta
S501A we de na di wɔl	44	[30] .		53	4.1		Injekshɔn Molding Prodakt ;High hardness prodakt dɛn;	Lɔw Mooney viskɔsiti; Gud likwiditi; Lɔw tɛmpracha rɛsistɛns;
S505A we de na di wɔl	45	[29] .		55	9.4		High hardness prodakt;Taya saydwɔl;Fɔm pat dɛn;	Lɔw Mooney viskɔsiti; Gud likwiditi; Ay ENB kɔntinyu; Fast curing spid; Lɔw tɛmpracha rɛsistɛns;
S537-3		35		57	2.3		Inner tube;Shoe;Konstrɔkshɔn mashin pat dɛn	High temperature resistance; Lɔw tɛmpracha rɛsistɛns;
S537-2		40		57	3		Inner tube;Konstrɔkshɔn mashin pat dɛn	High temperature resistance; Lɔw tɛmpracha rɛsistɛns;
S512F we de na di wɔl		63		69	4.5		Hose;Doa ɛn winda silin strip dɛn;Ekstrushɔn Prodakt;	Di ay ɛtɛlɛn kɔntinyu; Ay mɛkanikal prɔpati dɛn; Eksɛlɛnt prɔsesin prɔpati
S5890F we de na di wɔl		[87] .	64	68	5.5		Hose;Dens silin strip;Gasket;	High filling; Eksɛlɛnt prɔsesin prɔpati;
S552		84		58	4.1		Hose;Dense siling strip;Gasket;Industrial prodakt dɛn;	Eksɛlɛnt prɔsesin prɔpati; Lɔw tɛmpracha rɛsistɛns; Hay mɛkanikal prɔpati
S552-1 we de na di wɔl		84		58	5.7		Hose;Dense siling strip;Industrial prodakt dɛn;	Eksɛlɛnt prɔsesin prɔpati; Lɔw tɛmpracha rɛsistɛns; Hay mɛkanikal prɔpati; Hay ribaund
S553		[98] .	72	62	4.5		Doa ɛn winda silin strip dɛn;Waterproof;	High Mooney viscosity; Hay filin; Lɔw tɛmpracha rɛsistɛns; Hay mɛkanikal prɔpati;
S5206F we de na di wɔl		[84] .	81	60	8.5		Spɔnj profayl;Fɔm pat dɛn;	High Mooney viscosity; Hay ENB kɔntinyu; Fast kɔring spid; Hay mɛkanikal prɔpati;
S5527F we de na di wɔl		[109] .	81	60	8.5		Spɔnj profayl;Fɔm pat;High ribaund prodakt;	Ay filin; Hay Mooney viskositi; Hay ENB kɔntinyu; Fast kɔring spid; Hay mɛkanikal prɔpati;
S6090WF we de na di wɔl		53		70	5.7	50	Low hadness prodakt;Hose;Washing mashin doa sil;Otomobile waya harness;High ribaund prodakt;High mɛkanikal prɔpati	High ethylene content; Hay Mooney viskositi; Hay mɛkanikal prɔpati; Ɛksɛlɛnt prɔsesin prɔpati;
S600WF we de na di wɔl	61	[41] .		72	4	100	Low hadness prodakt;Baiskul taya;Otomobile waya harness;High ribaund prodakt;High mɛkanikal prɔpati	High filling; Hay mɛkanikal prɔpati; Ɛksɛlɛnt prɔsesin prɔpati;
S7486F we de na di wɔl		92	67	60	9		Spɔnj profayl;Dɛns silin strip;Fɔm pat dɛn;	Low ethylene konten; High ENB konten; Fast curing spid;
S6075WF we dɛn kɔl		50		60	4.7	75	Low hadness prodakt;Injection Molding Prodakt ;Otomobil waya harness;High mɛkanikal prɔpati	Low ethylene content; High Mooney viscosity; Eksɛlɛnt prɔsesin prɔpati; Lɔw tɛmpracha rɛsistɛns;

Herchy na di .	Mooney viskositi we de na di bɔdi	Mooney viskositi we de na di bɔdi	Mooney viskositi we de na di bɔdi	Ethylene we de insay di tin	ENB Di tin dɛn we de insay	Ekstend-ɔyl Kɔntinɛnt	Aplay fɔm	Karakta
Mak	ML(1+4)100°C na di wan	ML(1+4)125°C na di wan	ML(1+4)150°C na di wan	wt% .	wt% .	PHR we dɛn kɔl PHR	Aplay fɔm	Karakta
J-2070 we dɛn kɔl		44* .		57.8	1.9		Inner tube;Shoe;Konstrɔkshɔn mashin pat dɛn	High temperature resistance;Lɔw tɛmpracha rɛsistɛns;
J-2080 we dɛn kɔl		53		62	2		Inner tube;Shoe;Konstrɔkshɔn mashin pat dɛn	High temperechur resistance;Low temperechur resistance;High mɛkanikal prɔpati
3062E na		41		68.5	3.9	20	Injekshɔn Molding Prodakt ;Hose;Doa ɛn winda silin strip;Ekstrushɔn Prodakt;	Di ay ɛtɛlɛn kɔntinyu; Ay mɛkanikal prɔpati dɛn; Eksɛlɛnt prɔsesin prɔpati
J-3060P we de na di wɔl		45		68.5	4		Hose;Doa ɛn winda silin strip dɛn;Ekstrushɔn Prodakt;	Di ay ɛtɛlɛn kɔntinyu; Ay mɛkanikal prɔpati dɛn; Eksɛlɛnt prɔsesin prɔpati
J-3080 we dɛn kɔl		70		68.5	4		Hose;Doa ɛn winda silin strip dɛn;Ekstrushɔn Prodakt;	Di ay ɛtɛlɛn kɔntinyu; Ay mɛkanikal prɔpati dɛn; Eksɛlɛnt prɔsesin prɔpati
J-3080P we de na di wɔl		70		68.5	4		Hose;Doa ɛn winda silin strip dɛn;Ekstrushɔn Prodakt;	Di ay ɛtɛlɛn kɔntinyu; Ay mɛkanikal prɔpati dɛn; Eksɛlɛnt prɔsesin prɔpati
J-3092E		60		57.2	4.6	20	Hose;Doa ɛn winda silin strip dɛn;Ekstrushɔn Prodakt;	Di ay ɛtɛlɛn kɔntinyu; Ay mɛkanikal prɔpati dɛn; Eksɛlɛnt prɔsesin prɔpati
4045	45			52	7.7		High hardness prodakt;Taya saydwɔl;Fɔm pat dɛn;	Lɔw Mooney viskɔsiti; Gud likwiditi; Ay ENB kɔntinyu; Fast curing spid; Lɔw tɛmpracha rɛsistɛns;
J-4090 we dɛn kɔl		65		52.5	7.7		Taya saydwɔl;Fɔm pat dɛn;	Ay ENB kɔntinyu; Fast curing spid; Lɔw tɛmpracha rɛsistɛns;

Herchy na di .	Mooney viskositi we de na di bɔdi	Mooney viskositi we de na di bɔdi	Mooney viskositi we de na di bɔdi	Ethylene we de insay di tin	Di tin dɛn we de insay di prɔpilin	ENB Di tin dɛn we de insay	Ekstend-ɔyl Kɔntinɛnt	Aplay fɔm	Karakta
Mak	ML(1+4)100°C na di wan	ML(1+4)125°C na di wan	ML(1+4)150°C na di wan	wt% .	wt% .	wt% .	PHR we dɛn kɔl PHR	Aplay fɔm	Karakta
CO 033. Di wan dɛn we de wok	30			72	28
CO 034. Di wan dɛn we de wok	44			72	28
CO 038. Di wan dɛn we de wok		60		72	28
CO 043. Di wan dɛn we de wok	33			55	45
CO 054. Di wan dɛn we de wok	44			59	41
CO 058. Di wan dɛn we de wok	80	60		52	48
CO 059. Di wan dɛn we de wok		79		59	41
TƐR 4033	30			70	25	5		High hardness prodakt;Injection Molding Prodakt;Otomobil rɔba sil strip	Lɔw Mooney viskɔsiti; Gud likwiditi; Di ay ɛtɛlɛn kɔntinyu; Ay mɛkanikal prɔpati dɛn; Eksɛlɛnt prɔsesin prɔpati
TƐR 4038EP		60		68.6	27	4.4		Hose;Doa ɛn winda silin strip dɛn;Ekstrushɔn Prodakt;	Di ay ɛtɛlɛn kɔntinyu; Ay mɛkanikal prɔpati dɛn; Eksɛlɛnt prɔsesin prɔpati
TƐR 4039		77		68.6	27	4.4		Hose;Doa ɛn winda silin strip dɛn;Ekstrushɔn Prodakt;	Di ay ɛtɛlɛn kɔntinyu; Ay mɛkanikal prɔpati dɛn; Eksɛlɛnt prɔsesin prɔpati
TƐR 4044	44			61	35	4		Injekshɔn Molding Prodakt ;High hardness prodakt dɛn;	Lɔw Mooney viskɔsiti; Gud likwiditi; Ay mɛkanikal prɔpati dɛn; Eksɛlɛnt prɔsesin prɔpati
TƐR 4047		55		55.5	40	4.5		Brek Hose;Molded prodakt ;Gasket;Konstrɔkshɔn mashin pat dɛn;Inna tiub;Shu;	Low ethylene kɔntinyu fɔ de; Eksɛlɛnt prɔsesin prɔpati; Lɔw tɛmpracha rɛsistɛns
TƐR 4049		76		55.5	40	4.5		Hose;Dense siling strip;Gasket;Industrial prodakt dɛn;	Low ethylene kɔntinyu fɔ de; Ay mɛkanikal prɔpati dɛn; Lɔw tɛmpracha rɛsistɛns
TƐR 4334		28		68.3	27	4.7	43	High hadness prodakt;Injection Molding Prodakt;Otomobil rɔba sil strip;Industrial prodakt	Lɔw Mooney viskɔsiti; Gud likwiditi; Di ay ɛtɛlɛn kɔntinyu; Ay mɛkanikal prɔpati dɛn; Eksɛlɛnt prɔsesin prɔpati
TƐR 4436		43		66.5	28	5.5	67	Washin mashin doa sil;Industrial prodakt	Eksɛlɛnt prɔsesin prɔpati; Ay mɛkanikal prɔpati dɛn;
TƐR 4437		57		63.5	32	4.5	67	Washin mashin domɔt sil;Industrial prodak dɛm;	Eksɛlɛnt prɔsesin prɔpati; Ay mɛkanikal prɔpati dɛn; Di ay tɛmpracha rɛsistɛns;
TƐR 4535		32		64.6	32	3.4	100	Washin mashin doa sil;Molded prodakt ;	Low ENB kɔntinyu; Di ay tɛmpracha rɛsistɛns;
TƐR 6148		65		53	40	7	18	Pat dɛn we gɛt fom;Spɔnj profayl;Prodakt dɛn we dɛn dɔn mol ;	Low ethylene kɔntinyu fɔ de; Ay ENB kɔntinyu; Fast curing spid; Lɔw tɛmpracha rɛsistɛns
TƐR 6235		33		60.6	32	7.4	30	Insay tiub;Shu;Fɔm pat dɛn;Spɔnj profayl;Mold prodakt dɛn	Lɔw Mooney viskɔsiti; Gud likwiditi; Di ay ɛtɛlɛn kɔntinyu; Ay mɛkanikal prɔpati dɛn; Eksɛlɛnt prɔsesin prɔpati; Ay ENB kɔntinyu; Fast curing spid;
TƐR 6537		43		60	32	8	100	Fomed pat;Sponge profayl;Wash mashin doa sil;Molded prodakt	Ay ENB kɔntinyu; Fast curing spid;
TƐR 9046	67			60.1	31	8.9		Fomed pats;Spɔnj profayl;Industrial prodakt dɛn	Ay ENB kɔntinyu; Fast curing spid;
TƐR 4548		47		59.5	36	4.5	10	Insay tiub;Shu;Prodakt dɛn we dɛn dɔn mol ;Industrial prodakt dɛn;Prodakt dɛn we dɛn dɔn mol	Lɔw Mooney viskɔsiti; Gud likwiditi;
TƐR 8148		68		52.5	39	8.5	21	Fomed pats;Spɔnj profayl;Industrial prodakt;Molded prodakt	Low ethylene kɔntinyu fɔ de; Ay ENB kɔntinyu; Fast curing spid; Lɔw tɛmpracha rɛsistɛns
TƐR 7040		87		53.5	40	6.5		Hose;Doa ɛn winda silin strip dɛn;Ekstrushɔn Prodakt;	Low ethylene kɔntinyu fɔ de; Ay filin; Di viskɔsiti we gɛt ay Mooney; Ay mɛkanikal prɔpati dɛn; Lɔw tɛmpracha rɛsistɛns
TƐR 4049		76		55.5	40	4.5		Hose;Doa ɛn winda silin strip dɛn;Ekstrushɔn Prodakt;	Low ethylene kɔntinyu fɔ de; Lɔw tɛmpracha rɛsistɛns
TƐR 5029		80		69.5	25	5.5		Hose;Doa ɛn winda silin strip dɛn;Ekstrushɔn Prodakt;	Ay filin; Di ay ɛtɛlɛn kɔntinyu; Di viskɔsiti we gɛt ay Mooney; Ay mɛkanikal prɔpati dɛn